Assembly3 ConstraintPointsProjectDistance/de: Difference between revisions

From FreeCAD Documentation
(Created page with "Assembly3 ProjizierterPunktabstand")
 
(Created page with "{{Docnav/de |Gleicher Radius |Gleicher Punkt-Linie-Abstand |Assembly3_Workbench/de|A...")
Line 2: Line 2:
<languages/>
<languages/>


{{Docnav
{{Docnav/de
|[[Assembly3_ConstraintEqualRadius|Equal radius]]
|[[Assembly3_ConstraintEqualRadius/de|Gleicher Radius]]
|[[Assembly3_ConstraintEqualPointLineDistance|Equal point line distance]]
|[[Assembly3_ConstraintEqualPointLineDistance/de|Gleicher Punkt-Linie-Abstand]]
|[[Assembly3_Workbench|Assembly3]]
|[[Assembly3_Workbench/de|Assembly3]]
|IconL=Assembly_ConstraintEqualRadius.svg
|IconL=Assembly_ConstraintEqualRadius.svg
|IconR=Assembly_ConstraintEqualPointLineDistance.svg‎‎
|IconR=Assembly_ConstraintEqualPointLineDistance.svg‎‎

Revision as of 09:54, 10 September 2021

Diese Dokumentation ist noch nicht fertiggestellt. Bitte hilf mit und trage etwas zur Dokumentation bei.

Die Seite GuiBefehl Modell erklärt, wie Befehle dokumentiert werden sollten. Unter Category:UnfinishedDocu findest du weitere unvollständige Seiten wie diese (und unter Category:UnfinishedDocu/de unvollständige Übersetzungen). Siehe Category:Command Reference für sämtliche Befehle (und Category:UnfinishedDocu/de für vorhandene Übersetzungen).

Siehe WikiSeiten, um zu lernen, wie die Wiki-Seiten bearbeitet werden und FreeCAD Unterstützen, um andere Wege zu entdecken, wie du einen Beitrag leisten kannst.

Other languages:

Assembly3 ConstraintPointsProjectDistance

Menu location
None
Workbenches
Assembly3
Default shortcut
None
Introduced in version
-
See also
None

Description

The Points project distance command constrains the distance of two 2D points in relation to a Straight line.

Based on the line's direction (the z axis of its implicit coordinate system (ICS)) setting the distance of two points along the line means to add the distance value to the first point's z value to receive the second point's z value (and ignoring the x and y values).

Usage

  1. Select two points (2D or 3D).
  2. Select a straight line (2D or 3D).
  3. Activate the Points project distance command using the:
  4. Press the Solve constraints or the Quick solve button to recompute
(if Auto recompute and Smart recompute are disabled).