Assembly3 RechtwinkligFestlegen

From FreeCAD Documentation
Revision as of 14:06, 13 May 2021 by FBXL5 (talk | contribs) (Created page with "Assembly3 RechtwinkligFestlegen")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Diese Dokumentation ist noch nicht fertiggestellt. Bitte hilf mit und trage etwas zur Dokumentation bei.

Die Seite GuiBefehl Modell erklärt, wie Befehle dokumentiert werden sollten. Unter Category:UnfinishedDocu findest du weitere unvollständige Seiten wie diese (und unter Category:UnfinishedDocu/de unvollständige Übersetzungen). Siehe Category:Command Reference für sämtliche Befehle (und Category:UnfinishedDocu/de für vorhandene Übersetzungen).

Siehe WikiSeiten, um zu lernen, wie die Wiki-Seiten bearbeitet werden und FreeCAD Unterstützen, um andere Wege zu entdecken, wie du einen Beitrag leisten kannst.

Other languages:

Assembly3 ConstraintPerpendicular

Menu location
None
Workbenches
Assembly3
Default shortcut
None
Introduced in version
-
See also
None

Description

This tool builds a link between two objects of an assembly and matches their orientation. The selected elements of each object or more precisely their implicit coordinate systems (ICS) are used to position one object to another.

Assuming the first object is already locked in place by the Lock constraint then the following object is moved to a position where both z-axes are perpendicular.

The offset of their origins in x-, y- and z-direction and the angles between the x-, and y-axes are not defined. Related to the first object the following object can still move along the x-, y- and z-axis and spin around both z-axes. This is leaving 5 degrees of freedom (DOFs) for each link unconstrained.

The constraint accepts straight edges and planar faces.

Usage

  1. Place two objects into an assembly.
  2. Select one straight edge element or one planar face element of each object.
  3. Press the Perpendicular button.