Assembly3 ConstraintLock/de: Difference between revisions

From FreeCAD Documentation
(Created page with "{{Docnav/de | |Ebenen Ausrichten |Assembly3 | |IconR=Assembly_ConstraintAlignment.svg |IconC=Assembly3_workbench_icon...")
 
(Created page with "{{Docnav/de | |Ebenen Ausrichten |Assembly3 | |IconR=Assembly_ConstraintAlignment.svg |IconC=Assembly3_workbench_icon...")
Line 36: Line 36:




{{Docnav
{{Docnav/de
|
|
|[[Assembly3_ConstraintAlignment|Plane Alignment]]
|[[Assembly3_ConstraintAlignment|Ebenen Ausrichten]]
|[[Assembly3_Workbench|Assembly3]]
|[[Assembly3_Workbench|Assembly3]]
|
|

Revision as of 00:34, 11 May 2021

Diese Dokumentation ist noch nicht fertiggestellt. Bitte hilf mit und trage etwas zur Dokumentation bei.

Die Seite GuiBefehl Modell erklärt, wie Befehle dokumentiert werden sollten. Unter Category:UnfinishedDocu findest du weitere unvollständige Seiten wie diese (und unter Category:UnfinishedDocu/de unvollständige Übersetzungen). Siehe Category:Command Reference für sämtliche Befehle (und Category:UnfinishedDocu/de für vorhandene Übersetzungen).

Siehe WikiSeiten, um zu lernen, wie die Wiki-Seiten bearbeitet werden und FreeCAD Unterstützen, um andere Wege zu entdecken, wie du einen Beitrag leisten kannst.

Other languages:

Assembly3 ConstraintLock

Menu location
None
Workbenches
Assembly3
Default shortcut
None
Introduced in version
-
See also
None

Description

This tool links an object to the global coordinate system (GCS) of the assembly using the implicit coordinate system (ICS) of a selected element.

- If a vertex is selected the coordinates of its ICS are fixed relative to the GCS.
The object can still rotate around the vertex.
- If a (straight) edge is selected the coordinates of its ICS and the direction of its z-axis are fixed relative to the GCS.
The object can still rotate around the edge.
- If a face is selected the coordinates and the orientation of its ICS are fixed relative to the GCS.
The object is completely fixed to the GCS.

This can be used to define the fixed set in a static assembly as well as in a kinematic system.

Usage

  1. Place an object into an assembly.
  2. Select one element of the object.
  3. Press the Locked button.