Assembly3 ConstraintLengthRatio/de: Difference between revisions

From FreeCAD Documentation
(Created page with "{{Docnav/de |Gleiche Länge |Längendifferenz |Assembly3 |IconL=A...")
(Created page with "{{Docnav/de |Gleiche Länge |Längendifferenz |Assembly3 |IconL=A...")
Line 35: Line 35:


{{Docnav
{{Docnav/de
|[[Assembly3_ConstraintEqualLength|Equal length]]
|[[Assembly3_ConstraintEqualLength/de|Gleiche Länge]]
|[[Assembly3_ConstraintLengthDifference|Length difference]]
|[[Assembly3_ConstraintLengthDifference/de|Längendifferenz]]
|[[Assembly3_Workbench|Assembly3]]
|[[Assembly3_Workbench/de|Assembly3]]
|IconL=Assembly_ConstraintEqualLength.svg
|IconL=Assembly_ConstraintEqualLength.svg
|IconR=Assembly_ConstraintLengthDifference.svg
|IconR=Assembly_ConstraintLengthDifference.svg

Revision as of 21:57, 23 July 2021

Diese Dokumentation ist noch nicht fertiggestellt. Bitte hilf mit und trage etwas zur Dokumentation bei.

Die Seite GuiBefehl Modell erklärt, wie Befehle dokumentiert werden sollten. Unter Category:UnfinishedDocu findest du weitere unvollständige Seiten wie diese (und unter Category:UnfinishedDocu/de unvollständige Übersetzungen). Siehe Category:Command Reference für sämtliche Befehle (und Category:UnfinishedDocu/de für vorhandene Übersetzungen).

Siehe WikiSeiten, um zu lernen, wie die Wiki-Seiten bearbeitet werden und FreeCAD Unterstützen, um andere Wege zu entdecken, wie du einen Beitrag leisten kannst.

Other languages:

Assembly3 ConstraintLengthRatio

Menu location
None
Workbenches
Assembly3
Default shortcut
None
Introduced in version
-
See also
None

Description

This tool constrains the length of a 2D line like a non-subdivided wire made with the Draft workbench in relation with a work plane.

It links the length of the 2D line with the length of either another 2D line or a 3D line e.g. a straight edge element or a sketch line.

The length value of the first selected line equals the length value of the second line multiplied by a ratio value.

(Or the length value of the second selected line equals the length value of the first line divided by a ratio value.)

Usage

  1. Select two lines, of which at least one should be a 2D line.
  2. Press the Length ratio button.
  3. Set the Ratio value in the properties panel.
  4. Press the Solve constraints or the Quick solve button to recompute
(if Auto recompute and Smart recompute are disabled).