Assembly3 Kollinear
Diese Dokumentation ist noch nicht fertiggestellt. Bitte hilf mit und trage etwas zur Dokumentation bei.
Die Seite GuiBefehl Modell erklärt, wie Befehle dokumentiert werden sollten. Unter Category:UnfinishedDocu findest du weitere unvollständige Seiten wie diese (und unter Category:UnfinishedDocu/de unvollständige Übersetzungen). Siehe Category:Command Reference für sämtliche Befehle (und Category:UnfinishedDocu/de für vorhandene Übersetzungen).
Siehe WikiSeiten, um zu lernen, wie die Wiki-Seiten bearbeitet werden und FreeCAD Unterstützen, um andere Wege zu entdecken, wie du einen Beitrag leisten kannst.
Assembly3 ConstraintColinear |
Menu location |
---|
None |
Workbenches |
Assembly3 |
Default shortcut |
None |
Introduced in version |
- |
See also |
None |
Description
The Colinear command constrains two 2D lines such as non-subdivided wires made with the Draft workbench in relation with a work plane.
It links the positions of both 2D lines in a way that the origin of one line's implicit coordinate system (ICS) lies on the z axis of the other line's ICS with both z axes pointing in the same direction.
Usage
- Select two 2D lines.
- Activate the Colinear command using the:
- Colinear button.
- Press the Solve constraints or the Quick solve button to recompute
- (if Auto recompute and Smart recompute are disabled).
Hinweise
This tool accepts a 3D elements as well e.g. edges or center lines.
- 2D/3D or 3D/2D: Instead of the 3D elements z axis the projection of that axis onto the 2D line's workplane is used to position the lines.
- Both 3D: The lines are positioned to one another but I can't figure out how...
- Erste Schritte
- Installation: Herunterladen, Windows, Linux, Mac, Zusätzlicher Komponenten, Docker, AppImage, Ubuntu Snap
- Grundlagen: Über FreeCAD, Graphische Oberfläche, Mausbedienung, Auswahlmethoden, Objektname, Programmeinstellungen, Arbeitsbereiche, Dokumentstruktur, Objekteigenschaften, Hilf FreeCAD, Spende
- Hilfe: Tutorien, Video Tutorien
- Arbeitsbereiche: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework