Assembly3 AxialeAusrichtung

From FreeCAD Documentation
Revision as of 10:15, 13 May 2021 by FBXL5 (talk | contribs) (Created page with "Assembly3 AxialeAusrichtung")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Diese Dokumentation ist noch nicht fertiggestellt. Bitte hilf mit und trage etwas zur Dokumentation bei.

Die Seite GuiBefehl Modell erklärt, wie Befehle dokumentiert werden sollten. Unter Category:UnfinishedDocu findest du weitere unvollständige Seiten wie diese (und unter Category:UnfinishedDocu/de unvollständige Übersetzungen). Siehe Category:Command Reference für sämtliche Befehle (und Category:UnfinishedDocu/de für vorhandene Übersetzungen).

Siehe WikiSeiten, um zu lernen, wie die Wiki-Seiten bearbeitet werden und FreeCAD Unterstützen, um andere Wege zu entdecken, wie du einen Beitrag leisten kannst.

Other languages:

Assembly3 ConstraintAxial

Menu location
None
Workbenches
Assembly3
Default shortcut
None
Introduced in version
-
See also
None

Description

This tool builds a link between two or more objects of an assembly and matches their orientation. The selected elements of each object or more precisely their implicit coordinate systems (ICS) are used to position one object to another.

Assuming the first object is already locked in place by the Lock constraint then the following objects are moved to positions where the z-axes are collinear .

The offset of their origins on their common z-axis and the angle between their x-axes (and y-axes as well) are not defined. Related to the first object the following objects can still move along and spin around the z-axis. This is leaving 2 degrees of freedom (DOFs) for each link unconstrained.

The constraint accepts

- straight edges, which become collinear,
- planar faces, which are aligned using their surface normal axis,
- cylindrical faces, which are aligned using the axial direction.

Different types of geometry elements can be mixed.

Usage

  1. Place two or more objects into an assembly.
  2. Select one element of each object.
  3. Press the Axial Alignment button.