Assembly3 BefestigungVersatz

From FreeCAD Documentation
Revision as of 21:54, 4 August 2022 by FBXL5 (talk | contribs) (Created page with "{{GuiCommand/de |Name=Assembly3 ConstraintAttachmentOffset |Name/de=Assembly3 BefestigungVersatz |Icon=Assembly_ConstraintAttachmentOffset.svg‎‎ |Workbenches=Assembly3_W...")

Diese Dokumentation ist noch nicht fertiggestellt. Bitte hilf mit und trage etwas zur Dokumentation bei.

Die Seite GuiBefehl Modell erklärt, wie Befehle dokumentiert werden sollten. Unter Category:UnfinishedDocu findest du weitere unvollständige Seiten wie diese (und unter Category:UnfinishedDocu/de unvollständige Übersetzungen). Siehe Category:Command Reference für sämtliche Befehle (und Category:UnfinishedDocu/de für vorhandene Übersetzungen).

Siehe WikiSeiten, um zu lernen, wie die Wiki-Seiten bearbeitet werden und FreeCAD Unterstützen, um andere Wege zu entdecken, wie du einen Beitrag leisten kannst.

Other languages:

Assembly3 BefestigungVersatz

Menüeintrag
Keiner
Arbeitsbereich
Assembly3
Standardtastenkürzel
Keiner
Eingeführt in Version
-
Siehe auch
Keiner

Description

This tool builds a link between two objects of an assembly and fixes the distance between them and their orientation to each other. The selected elements of each object or more precisely their element coordinate systems (ECS) are used to fix the current relative position of the objects.

This link leaves no degree of freedom (DOF) unconstrained.

Usage

  1. Place two objects into an assembly.
  2. Select one element of each object.
  3. Press the Create "AttachmentOffset" constraint button.
  4. Both objects remain at their position.