Assembly3 EbenenAusrichten

From FreeCAD Documentation
Revision as of 08:28, 13 May 2021 by FBXL5 (talk | contribs) (Created page with "{{Docnav/de |Festsetzen |Deckungsgleiche Ebenen |Assembly3 |IconL=Assembly_C...")

Diese Dokumentation ist noch nicht fertiggestellt. Bitte hilf mit und trage etwas zur Dokumentation bei.

Die Seite GuiBefehl Modell erklärt, wie Befehle dokumentiert werden sollten. Unter Category:UnfinishedDocu findest du weitere unvollständige Seiten wie diese (und unter Category:UnfinishedDocu/de unvollständige Übersetzungen). Siehe Category:Command Reference für sämtliche Befehle (und Category:UnfinishedDocu/de für vorhandene Übersetzungen).

Siehe WikiSeiten, um zu lernen, wie die Wiki-Seiten bearbeitet werden und FreeCAD Unterstützen, um andere Wege zu entdecken, wie du einen Beitrag leisten kannst.

Other languages:

Assembly3 ConstraintAlignment

Menu location
None
Workbenches
Assembly3
Default shortcut
None
Introduced in version
-
See also
None

Description

This tool links two or more objects of an assembly and matches their orientations. The selected elements of each object or more precisely their implicit coordinate systems (ICSs) are used to position one object in relation to another.

Assuming the first object is already locked in place by the Lock constraint then the following objects are moved to positions where the x-y-planes of all ICSs are coplanar and the z-axes point in the same direction.

The offset of their z-axes and the angle between their x-axes (and y-axes as well) are not defined. Related to the first object the following objects can still move along the x- and y-direction and spin around the z-axis. This is leaving 3 degrees of freedom (DOFs) for each link unconstrained.

Usage

  1. Place two or more objects into an assembly.
  2. Select one planar face element of each object.
  3. Press the Alignment button.