Robot Вернуть в исходное положение
Robot RestoreHomePos |
Системное название |
---|
Robot RestoreHomePos |
Расположение в меню |
Робот → Перейти на главную |
Верстаки |
Robot |
Быстрые клавиши |
Нет |
Представлено в версии |
- |
См. также |
Нет |
Описание
Дать роботу переместиться в исходное положение.
Usage
- Select robot in the tree view or in the 3D view
- Click on or choose Robot → Move to home from the top menu.
Notes
- Command allows only for one robot to set its home position.
- If none or more than one robot is selected, you will be prompted to choose only one robot.
- If no home position has been specified via Robot_SetHomePos the position of the robot as inserted in the scene will be used as home position.
Robot
- Trajectories, non parametric: Create a trajectory, Set default orientation, Set default values, Insert waypoint, Insert waypoint (mouse)
- Trajectories, parametric: Create a trajectory from edges, Dress-up trajectory, Trajectory compound
Документация пользователя
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework