Partː Scala
Part Scala |
Posizione nel menu |
---|
Parte → Scala... |
Ambiente |
Part |
Avvio veloce |
Nessuno |
Introdotto nella versione |
0.22 |
Vedere anche |
Draft Clona, Draft Scala |
Descrizione
Part Scala ridimensiona le forme in base a un fattore specificato in tutte le direzioni o in base a fattori distinti in ciascuna direzione cardinale. Nel caso di fattori distinti, le forme potrebbero risultare distorte.
Esempio di ridimensionamento
Utilizzo
- Selezionare una o più forme nella Vista 3D o nella Vista ad albero.
- Esistono diversi modi per richiamare il comando:
- Premere il pulsante
Scala....
- Selezionare l'opzione Parte →
Scala... dal menu.
- Premere il pulsante
- Si apre un pannello delle azioni.
- Scegliere Ridimensionamento uniforme o Ridimensionamento non uniforme.
- Impostare i fattori di scala.
- Fare clic su OK.
In alternativa, la selezione può essere effettuata dopo aver lanciato il comando, selezionando una o più forme dalla lista nel pannello delle Azioni.
La Vista ad albero elencherà tanti oggetti Scala quante sono le forme selezionate. Ogni forma di input viene posizionata sotto il relativo oggetto Scala.
Pannello Azioni
![](/images/thumb/d/d3/Part_Scale_dialog.png/300px-Part_Scale_dialog.png)
- Il pulsante OK crea l'oggetto ridimensionato e chiude il pannello delle attività.
- Il pulsante Chiudi chiude il pannello delle attività senza fare nulla.
- Il pulsante Applica crea gli oggetti ridimensionati, ma non chiude il pannello delle attività. E' possibile quindi selezionare un'altra forma dall'elenco in basso e creare più oggetti in scala.
- Elenco Forma: qui è possibile selezionare quali forme ridimensionare. Se vengono selezionate più forme, vengono creati più oggetti Scala.
Note
- Non-uniform scaling will turn all edges into B-spline curves, and all faces into B-spline surfaces. These are computationally heavier.
- Points/Vertices can not be scaled as they are dimensionless.
- App Link objects linked to the appropriate object types and App Part containers with the appropriate visible objects inside can also be scaled.
- The task panel does not offer a preview yet. Apply will create a scaled object every time you click it, which can be useful as preview. They will however remain and yet another scaled object will be created as you click OK. Undo can be useful to clean them up before clicking OK.
Properties
See also: Property editor.
A Part Scale object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:
Data
Scale
- DatiBase (
Link
): The input shape (the shape upon which the Part Scale was applied). - DatiUniform (
Bool
): Controls uniform vs non-uniform scaling - DatiUniform Scale (
Float
): The scale factor for uniform scaling - DatiXScale (
Float
): The X scale factor for non-uniform scaling. - DatiYScale (
Float
): The Y scale factor, idem. - DatiZScale (
Float
): The Z scale factor, idem.
- Primitives: Box, Cylinder, Sphere, Cone, Torus, Tube, Create primitives, Shape builder
- Creation and modification: Extrude, Revolve, Mirror, Scale, Fillet, Chamfer, Make face from wires, Ruled Surface, Loft, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Thickness, Projection on surface, Attachment
- Boolean: Make compound, Explode Compound, Compound Filter, Boolean, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR
![](/images/thumb/9/94/User_hub.png/24px-User_hub.png)
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub