Sketcher: Vincolo Uguale
Uguale |
Posizione nel menu |
---|
PartDesign → Schizzo → Uguale |
Ambiente |
Schizzo |
Avvio veloce |
E |
Introdotto nella versione |
- |
Vedere anche |
Raggio |
Descrizione
Il vincolo Uguale forza due o più segmenti di linea in una linea, in una polilinea o in un rettangolo ad avere uguale lunghezza. Se applicato a archi o cerchi, vincola uguali i raggi. Non può essere applicato a geometrie primitive che non sono dello stesso tipo, ad esempio segmenti con archi.
Uso
Lo schizzo dell'esempio seguente contiene una serie di primitive di disegno (linea, polilinea, rettangolo, arco e cerchio).
Selezionare due o più segmenti di linea (ad esempio una linea e un lato del rettangolo).
Fare clic sulla icona nella barra degli strumenti di vincolo o selezionare il vincolo Uguali dal sottomenu dell'ambiente Schizzo (o quello dell'ambiente PartDesign).
Ora selezionare l'arco e il cerchio nel disegno.
e applicare il vincolo come in precedenza.
Ora selezionare il segmento di linea, tutti i segmenti della poli-linea e uno dei lati non ancora vincolati del rettangolo
e applicare vincolo come in precedenza.
Selezionare il segmento di retta e l'arco
e applicare il vincolo come in precedenza.
Una finestra di messaggio ricorda che gli elementi da vincolare devono essere dello stesso tipo geometrico (linee di curvatura pari a zero o linee con curvatura diversa da zero).
The example sketch below contains a number of sketch primitives (line,poly-line, rectangle, arc and circle).
Select two or more line segments (e.g. line and one side of the rectangle).
Click on Constrain equal in the Sketcher toolbar (in either the Sketcher or Part Design workbenches) or select the Constrain Equal menu item from the Sketcher constraints sub menu item in either the Sketch or Part Design menu item depending upon which workbench is selected (Sketcher or Part Design) to apply the constraint to the selected items.
Now select the arc and the circle in the sketch.
and apply Constrain equal as before.
Now select the line segment, all segments of the poly-line and one of the remaining unconstrained sides of the rectangle
and apply Constrain equal as before.
Select the line segment and the arc
and apply Constrain equal as before. A pop-up message indicates that the constrained items have to be of the same geometrical type (lines of zero curvature or lines of non-zero curvature).
- General: Create sketch, Edit sketch, Attach sketch, Reorient sketch, Validate sketch, Merge sketches, Mirror sketch, Leave sketch, View sketch, View section, Toggle grid, Toggle snap, Configure rendering order, Stop operation
- Sketcher geometries: Point, Polyline, Line, Arc, Arc by 3 points, Arc of ellipse, Arc of hyperbola, Arc of parabola, Circle, Circle by 3 points, Ellipse, Ellipse by 3 points, Rectangle, Centered rectangle, Rounded rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Regular polygon, Slot, Arc slot, B-spline by control points, Periodic B-spline by control points, B-spline by knots, Periodic B-spline by knots, Toggle construction geometry
- Sketcher constraints:
- Dimensional constraints: Dimension, Horizontal distance, Vertical distance, Distance, Auto radius/diameter, Radius, Diameter, Angle, Lock
- Geometric constraints: Coincident (unified), Coincident, Point on object, Horizontal/vertical, Horizontal, Vertical, Parallel, Perpendicular, Tangent or collinear, Equal, Symmetric, Block
- Other constraints: Refraction (Snell's law)
- Constraint tools: Toggle driving/reference constraint, Activate/deactivate constraint
- Sketcher tools: Fillet, Chamfer, Trim, Split, Extend, External geometry, Carbon copy, Select origin, Select horizontal axis, Select vertical axis, Array transform, Polar transform, Scale transform, Offset geometry, Symmetry, Remove axes alignment, Delete all geometry, Delete all constraints
- Sketcher B-spline tools: Convert geometry to B-spline, Increase B-spline degree, Decrease B-spline degree, Increase knot multiplicity, Decrease knot multiplicity, Insert knot, Join curves
- Sketcher visual: Select unconstrained DoF, Select associated constraints, Select associated geometry, Select redundant constraints, Select conflicting constraints, Show/hide circular helper for arcs, Show/hide B-spline degree, Show/hide B-spline control polygon, Show/hide B-spline curvature comb, Show/hide B-spline knot multiplicity, Show/hide B-spline control point weight, Show/hide internal geometry, Switch virtual space
- Additional: Sketcher Dialog, Preferences, Sketcher scripting
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub