TechDraw Längenmaß
TechDraw Längenbemaßung |
Menüeintrag |
---|
TechDraw → Bemaßung in die Zeichnung einfügen |
Arbeitsbereich |
TechDraw |
Standardtastenkürzel |
Keiner |
Eingeführt in Version |
- |
Siehe auch |
Horizontale Längenbemaßung, Vertikale Längenbemaßung |
Beschreibung
Das Werkzeug »Längenbemaßung« fügt ein lineares Maß in einer Ansicht hinzu. Das Längenmaß kann der Abstand zwischen zwei Ecken, die Länge einer Kante oder der Abstand zwischen zwei Kanten sein. Der Abstand ist zuerst der projizierte Abstand (wie in der Zeichnung dargestellt), aber dieser kann unter Verwendung des Bemaßungen verlinken-Werkzeugs zum eigentlichen 3D-Abstand geändert werden.
Length dimension taken from two arbitrary nodes of the view
Anwendung
- Punkte oder Kanten auswählen, die für die Abmessung benötigt werden.
- Auf die Schaltfläche File:TechDraw Dimension Length.png Bemaßung in die Zeichnung einfügen klicken.
- Die Bemaßung wird in die Ansicht eingefügt. Sie kann anschließend an die gewünschte Position gezogen werden.
Hinweise
Dimension objects are vulnerable to "topological naming" issues. This means that if you modify your 3D geometry the faces and edges of the model may be renamed internally; if a dimension is attached to an edge that is then modified, the dimension may break and not longer display the correct measurement value.
This means that in general it is not possible to keep the projected 2D dimensions synchronized with the actual 3D objects if the latter are modified. Therefore, it is recommended that dimensions be added towards the end of the model creation process, when the model is no longer being modified.
Eigenschaften
Daten =
- Daten-EigenschaftX: Horizontale Position des Bemaßungstexts relativ zur Ansicht.
- Daten-EigenschaftY: Vertikale Position des Bemaßungstexts relativ zur Ansicht.
- Daten-EigenschaftFormatSpec: Zusätzlicher Text zum Bemaßungstext hinzufügen (%.2f »zusätzlicher Text«).
- Daten-EigenschaftType: Länge, Radius, Durchmesser usw.. Wird normalerweise vom Benutzer nicht geändert.
- Daten-EigenschaftMeasureType: »True« - bezogen auf die 3D-Geometrie, oder »Projected« - bezogen auf die Zeichnung. Wird normalerweise vom Benutzer nicht geändert.
- Daten-EigenschaftOverTolerance: Der Betrag, um den das Stück größer sein könnte als die angezeigte Bemaßung.
- Daten-EigenschaftUnderTolerance: Der Betrag, um den das Stück kleiner sein könnte als die angezeigte Bemaßung.
- Daten-EigenschaftArbitrary: "True" - ignoriere tatsächlichen Wert und zeige FormatSpec als Wert an. "False" - zeige tatsächlichen Wert.
View
- AnsichtFont: The name of the font to use for the dimension text.
- AnsichtFontsize: Dimension text size in mm.
- AnsichtLineWidth: Dimension line weight.
- AnsichtColor: Color for lines and text.
Programmierung
Siehe auch: TechDraw API und FreeCAD Scripting Basics.
Das Längenbemaßung-Werkzeug kann sowohl in Makros als auch aus der Python-Konsole heraus mittels folgender Funktion angesprochen werden:
dim1 = FreeCAD.ActiveDocument.addObject('TechDraw::DrawViewDimension','Dimension')
dim1.Type = "Distance"
dim1.References2D=[(view1, 'Edge1')]
rc = page.addView(dim1)
Notes
- Edge selection. Edges can be difficult to select. You can adjust the selection area for edges using the parameter "/Mod/TechDraw/General/EdgeFuzz" (see Std_DlgParameter). This is a dimension-less number. The default is 10.0. Values in the 20-30 range will make it noticeably easier to select edges. Large numbers will cause overlaps with other drawing elements.
- Pages: Insert Default Page, Insert Page using Template, Redraw Page, Print All Pages
- Views: Insert View, Insert Active View, Insert Projection Group, Insert Section View, Insert Complex Section View, Insert Detail View, Insert Draft Workbench Object, Insert Arch Workbench Object, Insert Spreadsheet View, Insert Clip Group, Share View, Project Shape
- Stacking: Move view to top of stack, Move view to bottom of stack, Move view up one level, Move view down one level
- Decorations: Hatch Face using Image File, Apply Geometric Hatch to Face, Insert SVG Symbol, Insert Bitmap Image, Turn View Frames On/Off
- Dimensions: Insert Length Dimension, Insert Horizontal Dimension, Insert Vertical Dimension, Insert Radius Dimension, Insert Diameter Dimension, Insert Angle Dimension, Insert 3-Point Angle Dimension, Insert Horizontal Extent Dimension, Insert Vertical Extent Dimension, Link Dimension to 3D Geometry, Insert Balloon Annotation, Insert Axonometric Length Dimension, Insert Landmark Dimension, Adjust Geometric References of Dimension
- Annotations: Insert Annotation, Add Leaderline to View, Insert Rich Text Annotation, Add Cosmetic Vertex, Add Midpoint Vertices, Add Quadrant Vertices, Add Centerline to Faces, Add Centerline between 2 Lines, Add Centerline between 2 Points, Add Cosmetic Line Through 2 points, Add Cosmetic Circle, Change Appearance of Lines, Show/Hide Invisible Edges, Add Welding Information to Leader, Add Surface Finish Symbol, Add Hole or Shaft Tolerances
- Extensions:
- Attributes and modifications: Select Line Attributes, Cascade Spacing and Delta Distance, Change Line Attributes, Extend Line, Shorten Line, Lock/Unlock View, Position Section View, Position Horizontal Chain Dimensions, Position Vertical Chain Dimensions, Position Oblique Chain Dimensions, Cascade Horizontal Dimensions, Cascade Vertical Dimensions, Cascade Oblique Dimensions, Calculate the area of selected faces, Calculate the arc length of selected edges, Customize format label
- Centerlines and threading: Add Circle Centerlines, Add Bolt Circle Centerlines, Add Cosmetic Thread Hole Side View, Add Cosmetic Thread Hole Bottom View, Add Cosmetic Thread Bolt Side View, Add Cosmetic Thread Bolt Bottom View, Add Cosmetic Intersection Vertex(es), Add an offset vertex, Add Cosmetic Circle, Add Cosmetic Arc, Add Cosmetic Circle 3 Points, Add Cosmetic Parallel Line, Add Cosmetic Perpendicular Line
- Dimensions: Create Horizontal Chain Dimensions, Create Vertical Chain Dimensions, Create Oblique Chain Dimensions, Create Horizontal Coordinate Dimensions, Create Vertical Coordinate Dimensions, Create Oblique Coordinate Dimensions, Create Horizontal Chamfer Dimension, Create Vertical Chamfer Dimension, Create Arc Length Dimension, Insert '⌀' Prefix, Insert '〼' Prefix, Remove Prefix, Increase Decimal Places, Decrease Decimal Places
- Export: Export Page as SVG, Export Page as DXF
- Additional: Line Groups, Templates, Hatching, Geometric dimensioning and tolerancing, Preferences
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub