FEM RandbedingungWärmestrom
FEM RandbedingungWärmestrom |
Menüeintrag |
---|
Modell → Thermische Randbedingungen und Belastungen → Wärmestrombelastung |
Arbeitsbereich |
FEM |
Standardtastenkürzel |
Keiner |
Eingeführt in Version |
- |
Siehe auch |
FEM-Anleitung |
Beschreibung
By default, defines a convective heat flux load on a surface at a temperature with a film coefficient and with the environment (sink/ambient) temperature . The convective heat flux will satisfy: . Optionally, can also define a regular surface heat flux load.
introduced in version 1.0: Can be also used to define a radiation heat flux on a surface. It satisfies: where is the surface emissivity and is the Stefan-Boltzmann constant.
Anwendung
- Es gibt mehrere Möglichkeiten, den Befehl aufzurufen:
- Die Schaltfläche Wärmestrombelastung drücken.
- Den Menüeintrag Modell → Thermische Randbedingungen und Belastungen → Wärmestrombelastung auswählen.
- In der 3D-Ansicht die Fläche(n) auswählen, auf die die Wärmestrombelastung angewendet werden soll.
- Die gewünschten Werte für Wärmeübergangskoeffizient und Umgebungstemperatur eingeben.
Hinweise
- The heat flux load uses the following CalculiX cards depending on the selected mode:
- *FILM for Surface Convection
- introduced in version 1.0: *RADIATE for Surface Radiation
- *DFLUX for Surface heat flux
FEM
- Materials: Solid, Fluid, Nonlinear mechanical, Reinforced (concrete); Material editor
- Element geometry: Beam (1D), Beam rotation (1D), Shell (2D), Fluid flow (1D)
Constraints
- Electromagnetic: Electrostatic potential, Current density, Magnetization
- Geometrical: Plane rotation, Section print, Transform
- Mechanical: Fixed, Displacement, Contact, Tie, Spring, Force, Pressure, Centrif, Self weight
- Thermal: Initial temperature, Heat flux, Temperature, Body heat source
- Overwrite Constants: Constant vacuum permittivity
- Solve: CalculiX Standard, Elmer, Mystran, Z88; Equations: Deformation, Elasticity, Electrostatic, Electricforce, Magnetodynamic, Magnetodynamic 2D, Flow, Flux, Heat; Solver: Solver control, Solver run
- Results: Purge, Show; Postprocessing: Apply changes, Pipeline from result, Warp filter, Scalar clip filter, Function cut filter, Region clip filter, Contours filter, Line clip filter, Stress linearization plot, Data at point clip filter, Filter function plane, Filter function sphere, Filter function cylinder, Filter function box
- Additional: Preferences; FEM Install, FEM Mesh, FEM Solver, FEM CalculiX, FEM Concrete; FEM Element Types
Anwenderdokumentation
- Erste Schritte
- Installation: Herunterladen, Windows, Linux, Mac, Zusätzlicher Komponenten, Docker, AppImage, Ubuntu Snap
- Grundlagen: Über FreeCAD, Graphische Oberfläche, Mausbedienung, Auswahlmethoden, Objektname, Programmeinstellungen, Arbeitsbereiche, Dokumentstruktur, Objekteigenschaften, Hilf FreeCAD, Spende
- Hilfe: Tutorien, Video Tutorien
- Arbeitsbereiche: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework