Part: Cono

From FreeCAD Documentation
Revision as of 22:41, 25 December 2023 by Marco T (talk | contribs) (Created page with "Il Part Cono predefinito viene troncato. Può essere trasformato in un cono completo, non troncato, modificando la sua proprietà {{PropertyData|Radius1}} o {{PropertyData|Radius2}} su zero. Può essere trasformato in un segmento di cono modificando la sua proprietà {{PropertyData|Angle}}.")

Part Cone

Posizione nel menu
Parte → Primitive → Cono
Ambiente
Part
Avvio veloce
Nessuno
Introdotto nella versione
-
Vedere anche
Part Primitive

Descrizione

Il comando Part Cono crea un cono parametrico solido. Nel sistema di coordinate definito dalla sua proprietà DatiPlacement, la faccia inferiore del cono si trova sul piano XY con il centro nell'origine.

Il Part Cono predefinito viene troncato. Può essere trasformato in un cono completo, non troncato, modificando la sua proprietà DatiRadius1 o DatiRadius2 su zero. Può essere trasformato in un segmento di cono modificando la sua proprietà DatiAngle.

Utilizzo

  1. Attivare l'ambiente Parte.
  2. Richiamare il comando Cono in uno di questi modi:
    • Premere il pulsante Cono
    • Usare Part → Primitive → Cono dal menu principale.

Example

Part Cone from the scripting example

A Part Cone object created with the scripting example below is shown here.

Notes

  • A Part Cone can also be created with the Part Primitives command. With that command you can specify the dimensions and placement at creation time.

Opzioni

Cone

  • Radius 1: raggio dell'arco o del cerchio che definisce la faccia inferiore
  • Radius 2: raggio dell'arco o del cerchio che definisce la faccia superiore
  • Height: l'altezza del cono
  • Angle: il numero di gradi dell'arco che definisce le facce superiore e inferiore del cono. Il valore 360° predefinito crea facce circolari, un valore inferiore crea una porzione di un cono.

See also: Property editor.

A Part Cone object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:

Data

Attachment

The object has the same attachment properties as a Part Part2DObject.

Cone

  • DatiRadius1 (Length): The radius of the bottom face of the cone. Can be 0mm if DatiRadius2 is larger than 0mm. The default is 2mm.
  • DatiRadius2 (Length): The radius of the top face of the cone. Can be 0mm if DatiRadius1 is larger than 0mm. The default is 4mm.
  • DatiHeight (Length): The height of the cone. The default is 10mm.
  • DatiAngle (Angle): The angle of the circular arc that defines the top and bottom face of the cone. Valid range: 0° < value <= 360°. The default is 360°. If it is smaller than 360° the resulting solid will be a segment of a cone.

Scripting

See also: Autogenerated API documentation, Part scripting and FreeCAD Scripting Basics.

A Part Cone can be created with the addObject() method of the document:

cone = FreeCAD.ActiveDocument.addObject("Part::Cone", "myCone")
  • Where "myCone" is the name for the object.
  • The function returns the newly created object.

Example:

import FreeCAD as App

doc = App.activeDocument()

cone = doc.addObject("Part::Cone", "myCone")
cone.Radius1 = 5
cone.Radius2 = 10
cone.Height = 50
cone.Angle = 270
cone.Placement = App.Placement(App.Vector(1, 2, 3), App.Rotation(30, 60, 15))

doc.recompute()