Architektura Prostor
Arch Space |
Umístění Menu |
---|
Architecture → Space |
Pracovní stoly |
Architektura |
Výchozí zástupce |
S P |
Představen ve verzi |
0.14 |
Viz také |
Arch Wall/cs, Arch Structure/cs |
Popis
Nástroj Prostor umožňuje definovat prázdný objem, který je buď založen na tělese nebo definován svými hranicemi nebo mixem obou postupů. Je-li založen výhradně na tělese, je objem počítán od ohraničujícího boxu ze všech daných hranic a odečtem prostoru za každou hranicí. Objekt Prostor vždy definuje objem tělesa. Podlahová plocha objektu Prostor, počítaná z průsečíku vodorovné roviny ve středu objemu prostoru, také může být zobrazen, nastavením zobrazovacího módu objektu prostoru na "detailní".
Na obrázku výše je objekt prostoru vytvořen z existujícího tělesa, potom jsou přidány dvě plochy zdi jako hranice a mód zobrazení je nasatven na "detailní", aby zobrazoval podlahovou plochu.
Použití
Omezení
- The boundaries properties is currently not editable via GUI.
- See the forum announcement.
Vlastnosti
- ÚdajeZáklad: Základový objekt, pokud existuje (musí to být těleso)
- ÚdajeHranice: Seznam volitelných prvků hranic
- PohledText: The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data
- PohledFontName: The name of the font
- PohledTextColor: The color of the text
- PohledFontSize: The size of the text
- PohledFirstLine: The size of the first line of text (multiplies the font size. 1 = same size, 2 = double size, etc..)
- PohledLineSpacing: The space between the lines of text
- PohledTextPosition: The position of the text. Leave (0,0,0) for automatic position
- PohledTextAlign: The justification of the text
- PohledDecimals: The number of decimals to use for calculated texts
- PohledShowUnit: Show the unit suffix or not
Options
- To create zones that group several spaces, use a Arch BuildingPart and set its IFC type to "Spatial Zone"
- The space object has the same display modes as other Arch and Part objects, with one more, called Footprint, that displays only the bottom face of the space. introduced in version 0.19
Skriptování
Nástroj Prostor může být použit ve skriptech Pythonu a v makrech použitím následující funkce:
Space = makeSpace(objects=None, baseobj=None, name="Space")
- Vytvoří objekt prostoru ze zadaných objektů.
- Objekty mohou být jeden dokument objektu, v tomto případě se objekt stane základovým objektem prostoru nebo seznam vvybraných objektů jako návratová hodnota funkce FreeCADGui.Selection.getSelectionEx(), nebo seznam dvojic (objekt, jméno subobjektu).
- Vrací nově vytvořený objekt prostoru.
Příklad:
import FreeCAD, Arch
Box = FreeCAD.ActiveDocument.addObject("Part::Box", "Box")
Box.Length = 1000
Box.Width = 1000
Box.Height = 1000
Space = Arch.makeSpace(Box)
Space.ViewObject.LineWidth = 2
FreeCAD.ActiveDocument.recompute()
After a space object is created, selected faces can be added to it with the following code:
import FreeCAD, FreeCADGui, Draft, Arch
points = [FreeCAD.Vector(-500, 0, 0), FreeCAD.Vector(1000, 1000, 0)]
Line = Draft.makeWire(points)
Wall = Arch.makeWall(Line, width=150, height=2000)
FreeCAD.ActiveDocument.recompute()
# Select a face of the wall
selection = FreeCADGui.Selection.getSelectionEx()
Arch.addSpaceBoundaries(Space, selection)
Boundaries can also be removed, again by selecting the indicated faces:
selection = FreeCADGui.Selection.getSelectionEx()
Arch.removeSpaceBoundaries(Space, selection)
- Elements: Wall, Structure, Curtain Wall, Window, Roof, Space, Stairs, Equipment, Frame, Fence, Truss, Profile, Pipe, Pipe Connector
- Reinforcements: Straight Rebar, U-Shape Rebar, L-Shape Rebar, Stirrup, Bent-Shape Rebar, Helical Rebar, Column Reinforcement, Beam Reinforcement, Slab Reinforcement, Footing Reinforcement, Custom Rebar
- Panels: Panel, Panel Cut, Panel Sheet, Nest
- Materials: Material, Multi-Material
- Organization: Building Part, Project, Site, Building, Level, External reference, Section Plane, Schedule
- Axes: Axis, Axes system, Grid
- Modification: Cut with plane, Add component, Remove component, Survey
- Utilities: Component, Clone component, Split Mesh, Mesh to Shape, Select non-manifold meshes, Remove Shape from Arch, Close Holes, Merge Walls, Check, Toggle IFC Brep flag, 3 Views from mesh, Create IFC spreadsheet, Toggle Subcomponents
- Additional: Preferences, Import Export Preferences (IFC, DAE, OBJ, JSON, 3DS, SHP), IfcOpenShell, IfcPlusPlus, Arch API
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub