표준 위치 설정(Std Placement)

From FreeCAD Documentation
Revision as of 01:18, 1 January 2021 by Saltsalt (talk | contribs) (Created page with "'''표준 배치(Std Placement)''' 명령은 선택한 개체의 배치 작업 패널을 표시합니다.")

Std Placement

메뉴 위치
편집 → 배치...
작업대
모두
기본 단축키
없음
도입 버전
-
참조
표준 정렬, 배치 작업, 배치

설명

표준 배치(Std Placement) 명령은 선택한 개체의 배치 작업 패널을 표시합니다.

The Placement task panel

Usage

  1. Select a single object that has a 데이터Placement property in the property editor.
  2. Select the Edit → Placement... option from the menu.
  3. Change one or more of the translation and rotation parameters.
  4. Do one of the following:
    • Press the OK button to apply the changes and close the task panel.
    • Press the Apply button to apply the changes, but keep the task panel open for further changes.
  5. Press Esc or the Cancel button to abort the operation. This will undo any changes that have not been applied.

The dialog can also be launched by clicking on the ellipsis button ... that appears in the property editor when you click on the 데이터Placement property.

Notes

Scripting

See also: FreeCAD Scripting Basics.

See the Python scripting tutorial.

A placement is internally defined by a matrix; in many cases it is simpler to represent it by means of two components, a Base point (vector), and a Rotation value. The Rotation itself has different representations; it can be entirely defined by the value of a "quaternion" (xi + yj + zk + w), but it can also be described by a rotation Axis (unit vector) and a rotation Angle (radians).

import FreeCAD as App

doc = App.newDocument()
obj = doc.addObject("Part::Cylinder", "Cylinder")

print(obj.Placement)
# Placement [Pos=(0,0,0), Yaw-Pitch-Roll=(0,0,0)]
print(obj.Placement.Base)
# Vector (0.0, 0.0, 0.0)
print(obj.Placement.Rotation)
# Rotation (0.0, 0.0, 0.0, 1.0)

print(obj.Placement.Rotation.Angle)
# 0.0
print(obj.Placement.Rotation.Axis)
# Vector (0.0, 0.0, 1.0)
print(obj.Placement.Rotation.Q)
# (0.0, 0.0, 0.0, 1.0)

Move the base point of the object, then rotate the object 45 degrees around the X axis.

import math

obj.Placement.Base = App.Vector(5, 3, 1)
obj.Placement.Rotation.Axis = App.Vector(1, 0, 0)
obj.Placement.Rotation.Angle = math.radians(45)

print(obj.Placement)
# Placement [Pos=(5,3,1), Yaw-Pitch-Roll=(0,0,45)]
print(obj.Placement.Rotation.Q)
# (0.3826834323650898, 0.0, 0.0, 0.9238795325112867)
print(obj.Placement.Matrix)
# Matrix ((1,0,0,5),(0,0.707107,-0.707107,3),(0,0.707107,0.707107,1),(0,0,0,1))