Sketcher reference/ru: Difference between revisions

From FreeCAD Documentation
No edit summary
(Created page with "Пользователь {{Emphasis|chrisb}} написал длинное 70-страничное справочное руководство по Sketcher_Workbench/ru|В...")
Line 3: Line 3:
== Введение ==
== Введение ==


Пользователь {{Emphasis|chrisb}} написал длинное 70-страничное справочное руководство по [[Sketcher_Workbench/ru|Верстаку Sketcher]], которое охватывает многие вопросы использования этого верстака. Для неопытных пользователей это краткое введение, в котором рассказывается об основах использования Sketcher'а, а затем подробно рассказывается о создании геометрических элементов и использовании каждого типа ограничений.
User {{Emphasis|chrisb}} wrote a lengthy 70-page reference manual for the [[Sketcher_Workbench|Sketcher Workbench]] that covers many topics of using this workbench. For inexperienced users, it is a gentle introduction that covers the basic usage of the Sketcher, and then goes into many details of creating geometrical elements, and using each type of constraint.


The manual is a work in progress, as some sections are reviewed and updated depending on the development occurring on the [[Sketcher_Workbench|Sketcher Workbench]]. The original manual was written for FreeCAD 0.17, then it was updated for 0.18, and now for 0.19. The latest manual can be found in the forum thread, [https://forum.freecadweb.org/viewtopic.php?f=36&t=30104 Sketcher tutorial].
The manual is a work in progress, as some sections are reviewed and updated depending on the development occurring on the [[Sketcher_Workbench|Sketcher Workbench]]. The original manual was written for FreeCAD 0.17, then it was updated for 0.18, and now for 0.19. The latest manual can be found in the forum thread, [https://forum.freecadweb.org/viewtopic.php?f=36&t=30104 Sketcher tutorial].

Revision as of 16:29, 12 July 2022

Other languages:

Введение

Пользователь chrisb написал длинное 70-страничное справочное руководство по Верстаку Sketcher, которое охватывает многие вопросы использования этого верстака. Для неопытных пользователей это краткое введение, в котором рассказывается об основах использования Sketcher'а, а затем подробно рассказывается о создании геометрических элементов и использовании каждого типа ограничений.

The manual is a work in progress, as some sections are reviewed and updated depending on the development occurring on the Sketcher Workbench. The original manual was written for FreeCAD 0.17, then it was updated for 0.18, and now for 0.19. The latest manual can be found in the forum thread, Sketcher tutorial.

В связи с постоянно эволюционирующим характером руководства, этот документ также известен как "Sketcher lecture" (Лекция по Sketcher'у).

Пример эскиза в справочном руководстве.

Содержание

The general structure of the manual is:

  • Basics
    • Create a sketch
    • The Sketcher window
    • General remarks on degrees of freedom
    • Auto constraints
  • Geometric elements
    • Common usage
    • Line
    • Circle
    • Arc
    • Polyline
    • Rectangle
    • Polygon
    • Slot
    • B-splines
    • Conical sections
    • Construction geometry
    • Point
  • Constraints
    • Selecting constraints
    • Applying constraints
    • The solver
    • Coincidence
    • Point on object
    • Vertical
    • Horizontal
    • Parallel
    • Perpendicular
    • Tangency
    • Equality
    • Symmetry
    • Block
    • Lock
    • Horizontal distance
    • Vertical distance
    • Length
    • Radius and diameter
    • Angle
    • Dos and don'ts with constraints
    • External geometry
  • Creating objects based on sketches (to be written)
    • Sketches for pads
    • Symmetry
    • Placement and attachment offset
    • Validate sketches

Template:Tutorials navi/ru