Sketcher: Vincolo Diametro
Diametro |
Posizione nel menu |
---|
Sketch → Vincoli → Diametro |
Ambiente |
Sketcher |
Avvio veloce |
Nessuno |
Introdotto nella versione |
- |
Vedere anche |
Distanza, Distanza orizzontale, Distanza verticale |
Descrizione
Questo vincolo forza il valore del diametro di un cerchio o di un arco a un valore specifico. Se viene selezionato più di un cerchio o arco prima di lanciare il comando, un prompt chiede se tutti gli elementi selezionati devono condividere lo stesso diametro. Nel caso di una risposta affermativa, viene aggiunto un vincolo di diametro e un vincolo di uguale lunghezza a tutti gli elementi. Se la risposta è negativa, vengono creati vincoli di diametro separati per ogni cerchio o arco ma con valori uguali che è possibile modificare separatamente dopo la creazione.
Utilizzo
See also: Drawing aids.
Continue mode
- Selezionare uno o più cerchi o archi.
- Premere il pulsante Diametro.
- Si apre una finestra di dialogo per modificare o confermare il valore. Premere OK per confermare. Se sono stati selezionati più cerchi o archi, tutti i vincoli adottano questo valore. Per modificare i loro valori separatamente fare doppio clic sull'etichetta della dimensione nella vista 3D; oppure nell'elenco dei Vincoli, fare doppio clic sul vincolo o fare clic con il tasto destro e selezionare Cambia valore.
- L'etichetta e la linea della quota possono essere spostate e ruotate nella vista 3D facendo clic sul valore e trascinando il mouse tenendo premuto il pulsante sinistro.
Run-once mode
- Select the edge of one or more circles or arcs.
- Invoke the tool as explained above.
- Optionally edit the constraint value.
- Depending on the selection one or more constraints are added, see Notes.
Notes
- If driving constraints are created and multiple elements that are not external geometry have been pre-selected, only the first of those receives a dimensional constraint, while between the first and the others Equal constrains are applied.
Scripting
Sketch.addConstraint(Sketcher.Constraint('Diameter', ArcOrCircle, App.Units.Quantity('123.0 mm')))
The Sketcher scripting page explains the values which can be used for ArcOrCircle
, and contains further examples on how to create constraints from Python scripts.
- General: Create sketch, Edit sketch, Map sketch to face, Reorient sketch, Validate sketch, Merge sketches, Mirror sketch, Leave sketch, View sketch, View section, Toggle grid, Toggle snap, Configure rendering order, Stop operation
- Sketcher geometries: Point, Line, Arc, Arc by 3 points, Circle, Circle by 3 points, Ellipse, Ellipse by 3 points, Arc of ellipse, Arc of hyperbola, Arc of parabola, B-spline by control points, Periodic B-spline by control points, B-spline by knots, Periodic B-spline by knots, Polyline, Rectangle, Centered rectangle, Rounded rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Regular polygon, Slot, Fillet, Corner-preserving fillet, Trim, Extend, Split, External geometry, Carbon copy, Toggle construction geometry
- Sketcher constraints:
- Geometric constraints: Coincident, Point on object, Vertical, Horizontal, Parallel, Perpendicular, Tangent, Equal, Symmetric, Block
- Dimensional constraints: Lock, Horizontal distance, Vertical distance, Distance, Radius or weight, Diameter, Auto radius/diameter, Angle, Refraction (Snell's law)
- Constraint tools: Toggle driving/reference constraint, Activate/deactivate constraint
- Sketcher tools: Select unconstrained DoF, Select associated constraints, Select associated geometry, Select redundant constraints, Select conflicting constraints, Show/hide internal geometry, Select origin, Select horizontal axis, Select vertical axis, Symmetry, Clone, Copy, Move, Rectangular array, Remove axes alignment, Delete all geometry, Delete all constraints
- Sketcher B-spline tools: Show/hide B-spline degree, Show/hide B-spline control polygon, Show/hide B-spline curvature comb, Show/hide B-spline knot multiplicity, Show/hide B-spline control point weight, Convert geometry to B-spline, Increase B-spline degree, Decrease B-spline degree, Increase knot multiplicity, Decrease knot multiplicity, Insert knot, Join curves
- Sketcher virtual space: Switch virtual space
- Additional: Sketcher Dialog, Preferences, Sketcher scripting
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub