Sketcher ConstrainCoincident/pt-br: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
 
Line 23: Line 23:
==Description==
==Description==


The [[Image:Sketcher_ConstrainCoincident.svg|24px]] [[Sketcher_ConstrainCoincident|Sketcher ConstrainCoincident]] command creates a coincident constraint between points, or ({{Version|0.21}}) a concentric constraint between circles, arcs and/or ellipses (by making their centers coincident).
The [[Image:Sketcher_ConstrainCoincident.svg|24px]] [[Sketcher_ConstrainCoincident|Sketcher ConstrainCoincident]] tool creates a coincident constraint between points, or ({{Version|0.21}}) a concentric constraint between circles, arcs and/or ellipses (by making their centers coincident).


{{Version|0.22}}: This command is replaced by the [[Sketcher_ConstrainCoincidentUnified|Sketcher ConstrainCoincidentUnified]] command if the {{MenuCommand|Unify Coincident and PointOnObject}} option is selected in the [[Sketcher_Preferences#General|Sketcher Preferences]].
{{Version|1.0}}: This tool is replaced by the [[Sketcher_ConstrainCoincidentUnified|Sketcher ConstrainCoincidentUnified]] tool if the '''Unify Coincident and PointOnObject''' option is selected in the [[Sketcher_Preferences#General|preferences]].


==Usage==
==Usage==


See also: [[Sketcher_Workbench#Drawing_aids|Drawing aids]].
# Optionally do one of the following:

#* Select two or more points.
===[[Sketcher_Workbench#Continue_modes|Continue mode]]===
#* Select two or more edges of circles, arcs, ellipses or arcs of ellipses.

# There are several ways to invoke the command:
# Make sure there is no selection.
# There are several ways to invoke the tool:
#* Press the {{Button|[[Image:Sketcher_ConstrainCoincident.svg|16px]] [[Sketcher_ConstrainCoincident|Constrain coincident]]}} button.
#* Press the {{Button|[[Image:Sketcher_ConstrainCoincident.svg|16px]] [[Sketcher_ConstrainCoincident|Constrain coincident]]}} button.
#* Select the {{MenuCommand|Sketch → Sketcher constraints → [[Image:Sketcher_ConstrainCoincident.svg|16px]] Constrain coincident}} option from the menu.
#* Select the {{MenuCommand|Sketch → Sketcher constraints → [[Image:Sketcher_ConstrainCoincident.svg|16px]] Constrain coincident}} option from the menu.
#* Use the keyboard shortcut: {{KEY|C}}.
#* Use the keyboard shortcut: {{KEY|C}}.
# To indicate that the command has been activated the cursor changes to a white cross with the command icon.
# The cursor changes to a cross with the tool icon.
# Do one of the following:
# Optionally keep selecting elements. You can only select two elements at a time now.
#* Select two points.
# To finish the command press {{KEY|Esc}} or the right mouse button, or start a another constraints or geometries command.
#* Select two edges of circles, arcs, ellipses or arcs of ellipses.
# A constraint is added.
# Optionally keep creating constraints.
# To finish, right-click or press {{KEY|Esc}}, or start another geometry or constraint creation tool.

===Run-once mode===

# Do one of the following:
#* Select two or more points.
#* Select two or more edges of circles, arcs, ellipses or arcs of ellipses.
# Invoke the tool as explained above.
# Depending on the selection one or more constraints are added.


==Notes==
== Alternatives to Coincident constraint ==


* {{Version|1.0}}: Points with Coincident constraints are marked with the '''Constraint symbols''' [[Sketcher_Preferences#Display|color]].
Some combinations which are not possible with a coincident constraint can be emulated using other constraints:
* The [[File:Sketcher_ConstrainSymmetric.svg|16px]] [[Sketcher_ConstrainSymmetric|Symmetric]] constraint can be used to place a start point, end point or center point on the midpoint of a straight line.
* A midpoint-to-midpoint placement of two straight lines can be achieved by creating a new [[File:Sketcher_CreatePoint.svg|16px]] [[Sketcher_CreatePoint|Point]] and using two [[File:Sketcher_ConstrainSymmetric.svg|16px]] [[Sketcher_ConstrainSymmetric|Symmetric]] constraints so that it lies on the midpoint of both lines.
* A vertex can be constrained to lie along an edge using a [[File:Sketcher_ConstrainPointOnObject.svg|16px]] [[Sketcher_ConstrainPointOnObject|PointOnObject]] constraint. Note that with this constraint, the point can lie anywhere on the full extension of a segment or curve (i.e. also before the start point or beyond the end point).
* A collinear placement of two straight lines can be obtained by applying a [[File:Sketcher_ConstrainTangent.svg|16px]] [[Sketcher_ConstrainTangent|Tangent]] constraint to them, or by combining a [[File:Sketcher_ConstrainPointOnObject.svg|16px]] [[Sketcher_ConstrainPointOnObject|PointOnObject]] constraint and a [[File:Sketcher_ConstrainParallel.svg|16px]] [[Sketcher_ConstrainParallel|Parallel]] constraint.


==Scripting==
==Scripting==

Latest revision as of 14:49, 23 April 2024

Sketcher ConstrainCoincident

Veja também
Sketch → Sketcher constraints → Constrain coincident
Bancadas de trabalho
Sketcher
Atalho padrão
C
Introduzido na versão
-
Veja também
Constrain Lock, Constrain Point onto Object

Description

The Sketcher ConstrainCoincident tool creates a coincident constraint between points, or (introduced in version 0.21) a concentric constraint between circles, arcs and/or ellipses (by making their centers coincident).

introduced in version 1.0: This tool is replaced by the Sketcher ConstrainCoincidentUnified tool if the Unify Coincident and PointOnObject option is selected in the preferences.

Usage

See also: Drawing aids.

Continue mode

  1. Make sure there is no selection.
  2. There are several ways to invoke the tool:
    • Press the Constrain coincident button.
    • Select the Sketch → Sketcher constraints → Constrain coincident option from the menu.
    • Use the keyboard shortcut: C.
  3. The cursor changes to a cross with the tool icon.
  4. Do one of the following:
    • Select two points.
    • Select two edges of circles, arcs, ellipses or arcs of ellipses.
  5. A constraint is added.
  6. Optionally keep creating constraints.
  7. To finish, right-click or press Esc, or start another geometry or constraint creation tool.

Run-once mode

  1. Do one of the following:
    • Select two or more points.
    • Select two or more edges of circles, arcs, ellipses or arcs of ellipses.
  2. Invoke the tool as explained above.
  3. Depending on the selection one or more constraints are added.

Notes

Scripting

The constraint can be created from macros and from the Python console by using the following command:

Sketch.addConstraint(Sketcher.Constraint('Coincident',LineFixed,PointOfLineFixed,LineMoving,PointOfLineMoving))

where :

  • Sketch is a sketch object
  • LineFixed is the number of the line, that will not move by applying the constraint
  • PointOfLineFixed indicates which vertex of LineFixed has to fulfill the constraint
  • LineMoving is the number of the line, that will move by applying the constraint
  • PointOfLineMoving indicates which vertex of LineMoving has to fulfill the constraint

As the names LineFixed and LineMoving indicate, if both constrained vertices are free to move in any direction, the first one (first to be selected in the Gui) will remain fixed and the other one will move. In the presence of existing constraints, however, both edges may move.

The Sketcher scripting page explains the values which can be used for LineFixed, PointOfLineFixed, LineMoving and PointOfLineMoving, and contains further examples on how to create constraints from Python scripts.