Sketcher "Увеличить степень B-сплайна"
|
Системное название |
---|
Sketcher_BSplineIncreaseDegree |
Расположение в меню |
Sketch → B-сплйан инструменты эскиза → Увеличить степень B-сплайна |
Верстаки |
Sketcher |
Быстрые клавиши |
Нет |
Представлено в версии |
0.17 |
См. также |
Показать/скрыть степень B-сплайна, Уменьшить степень B-сплайна |
Описание
Increases the degree (order) of a B-spline (see this page for more info about B-splines).
B-splines are basically a combination of Bézier curves (nicely explained in this and this video).
In this cubic spline (degree 3) there are 3 segments, meaning 3 curves are connected at 2 knots
(degree is indicated by the number, indication can be changed using the toolbar button Show/hide B-spline degree):
B-spline with degree 3 and 2 knots that each have the multiplicity 1.
The outer segments have each 2 control points, the inner one none to fulfill the constraint that the knots have multiplicity 1. (see this page for an explanation of the multiplicity)
Increasing the degree will add control points and the shape of the spline is not changed:
Same B-spline where the degree was changed from 3 to 4. Note that also the knot multiplicity was increased.
If you take this result and decrease the degree, you cannot get the initial state of the spline information will be lost by this operation. For our example decreasing the degree again leads to this:
Same B-spline where the degree was changed back from 4 to 3. Note that the knot multiplicity was increased. Depending on the spline, the algorithm to decrease the degree may add a lot of knots to preserve the spline shape as happened in this example.
You can see that now each segment has 2 control points and the knots are coincident with each a further control point. The knots have now C0 continuity so that the spline will get "edges" when you move a control point. So the information of a higher continuity is lost. (see this page to for an explanation of the continuity)
Применение
- General: Create sketch, Edit sketch, Map sketch to face, Reorient sketch, Validate sketch, Merge sketches, Mirror sketch, Leave sketch, View sketch, View section, Toggle grid, Toggle snap, Configure rendering order, Stop operation
- Sketcher geometries: Point, Line, Arc, Arc by 3 points, Circle, Circle by 3 points, Ellipse, Ellipse by 3 points, Arc of ellipse, Arc of hyperbola, Arc of parabola, B-spline by control points, Periodic B-spline by control points, B-spline by knots, Periodic B-spline by knots, Polyline, Rectangle, Centered rectangle, Rounded rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Regular polygon, Slot, Fillet, Corner-preserving fillet, Trim, Extend, Split, External geometry, Carbon copy, Toggle construction geometry
- Sketcher constraints:
- Geometric constraints: Coincident, Point on object, Vertical, Horizontal, Parallel, Perpendicular, Tangent, Equal, Symmetric, Block
- Dimensional constraints: Lock, Horizontal distance, Vertical distance, Distance, Radius or weight, Diameter, Auto radius/diameter, Angle, Refraction (Snell's law)
- Constraint tools: Toggle driving/reference constraint, Activate/deactivate constraint
- Sketcher tools: Select unconstrained DoF, Select associated constraints, Select associated geometry, Select redundant constraints, Select conflicting constraints, Show/hide internal geometry, Select origin, Select horizontal axis, Select vertical axis, Symmetry, Clone, Copy, Move, Rectangular array, Remove axes alignment, Delete all geometry, Delete all constraints
- Sketcher B-spline tools: Show/hide B-spline degree, Show/hide B-spline control polygon, Show/hide B-spline curvature comb, Show/hide B-spline knot multiplicity, Show/hide B-spline control point weight, Convert geometry to B-spline, Increase B-spline degree, Decrease B-spline degree, Increase knot multiplicity, Decrease knot multiplicity, Insert knot, Join curves
- Sketcher virtual space: Switch virtual space
- Additional: Sketcher Dialog, Preferences, Sketcher scripting
![](/images/thumb/9/94/User_hub.png/24px-User_hub.png)
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework