Part: Torul
Part Torus |
poziția meniului |
---|
Part → Torus |
Ateliere |
Part, Complete |
scurtătură |
nici unul |
Prezentat în versiune |
- |
A se vedea, de asemenea, |
Part CreatePrimitives |
Description
Descriere
Creează un tor simplu parametric, cu parametrii de poziție, unghi1, unghi2, unghi 3, raza1 și raza2.
Cum se folosește
În bara de lucru Part faceți clic pe pictograma torus . Torusul va fi poziționat la origine (punctul 0,0,0) la crearea. Parametrii unghiului (unghiul1, unghiul2, unghiul3), precum și parametrii razei (raza1, raza2) permit parametrizarea torusului, a se vedea paragraful următor.
Result: The torus will be positioned at origin (point 0,0,0) on creation.
The angle parameters (angle1, angle2, angle3), as well as the radius parameters (radius1, radius2) permit to parametrize the torus, see next section.
Opțiuni
Parameter
A torus can be assimilated to a small disc that makes a circular orbit around an imaginary axe. Thus the parametric torus is defined by the following parameters:
- Radius1: Raza cercului în jurul căruia circulă discul
- Radius2: Raza discului care definește forma torului
- Angle1: un unghi pentru a tăia / defini discul torului
- Angle2: al doilea unghi pentru a tăia / defini discul torului
- Angle3: al treilea unghi pentru a defini circumferința torului.
precum și setul standard de parametri de plasare. Imaginile de mai jos oferă o imagine de ansamblu vizuală a parametrilor menționați antecedent:
The parameter Radius1 has a value of 20 mm.
The parameter Radius2 has a value of 2 mm.
The parameter Angle1 has a value of -90°. Notice that, the "angle measure" tool cannot display negative angle. Considered the displayed value in picture as "-90°".
The parameter Angle2 has a value of 90°.
Scripting
A Part Torus can be created using the following function:
torus = FreeCAD.ActiveDocument.addObject("Part::Torus", "myTorus")
- Where
"myTorus"
is the name for the object. - The function returns the newly created object.
- Primitives: Box, Cylinder, Sphere, Cone, Torus, Tube, Create primitives, Shape builder
- Creation and modification: Extrude, Revolve, Mirror, Fillet, Chamfer, Make face from wires, Ruled Surface, Loft, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Thickness, Projection on surface, Attachment
- Boolean: Make compound, Explode Compound, Compound Filter, Boolean, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR
- Measure: Measure Linear, Measure Angular, Measure Refresh, Clear All, Toggle All, Toggle 3D, Toggle Delta
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub