Part: Instrumentul Loft
This documentation is not finished. Please help and contribute documentation.
GuiCommand model explains how commands should be documented. Browse Category:UnfinishedDocu to see more incomplete pages like this one. See Category:Command Reference for all commands.
See WikiPages to learn about editing the wiki pages, and go to Help FreeCAD to learn about other ways in which you can contribute.
|
poziția meniului |
---|
Part → Loft... |
Ateliere |
Part |
scurtătură |
nici unul |
Prezentat în versiune |
- |
A se vedea, de asemenea, |
Part Sweep |
Overview
Prezentare generală
Instrumentul Loft din Atelierul (Part Workbench) este utilizat pentru a crea o fațetă, o cochilie sau o formă solidă (corp) plecând de la două sau mai multe profiluri. Profilele pot fi un punct (vertex), o linie (margine), o polilinie sau o fațetă. Muchiile și poliliniile pot fi deschise sau închise. Există mai multe limitări și complicații limitations and complications , vezi mai jos, însă profilurile pot proveni de la primitivele geometrice din Atelierul Part/Piese, de la funcționalitățile Aelierului Draft Workbench și de la Atelierul Sketch.
Instrumentul Loft are trei parametrii, "Ruled","Solid" and "Closed" fiecare având câte o valoare sau "true" ori "false".
Dacă "Solid" are valoarea "true" FreeCAD creează un solid dacă profilele sunt forme geometrice închise, dacă valorea este "false" FreeCAD creează o fațetă sau (dacă are mi mult de o fațetă) o cochilie dacă este un profil închis sau deschis.
Dacă este true" , "Ruled" FreeCAD creează o fațetă, fațetele sau solidele din suprafețele riglate. Ruled surface page on Wikipedia.
FreeCAD încearcă să atașeze ultimul profil la primul profil pentru a crea o figură închisă.
Pentru mai multe informații supra modului cum profilele sunt legate împreună , referiți-vă la pagina Part Loft Technical Details .
Notes
- App Link objects linked to the appropriate object types and App Part containers with the appropriate visible objects inside can also be used as profiles and paths. introduced in version 0.20
Limitations and complications
Limitări și complicații
- Un vertex sau un punct
- vârful sau punctul pot fi utilizate numai ca primul și / sau ultimul profil din lista de profiluri.
- De examplu
- you cannot loft from a circle to a point, to an ellipse.
- However you could Loft from a point to a circle to an ellipse to another point.
- De examplu
- vârful sau punctul pot fi utilizate numai ca primul și / sau ultimul profil din lista de profiluri.
- Open or closed geometry profiles can not be mixed in one single Loft
- In one Loft, all profiles (lines wires etc.) must be either open or closed.
- De examplu
- FreeCAD can not Loft between one Part Circle and one default Part Line.
- De examplu
- In one Loft, all profiles (lines wires etc.) must be either open or closed.
- Draft Workbench features
- Draft Workbench features can be directly used as a profile in FreeCAD 0.14 or later.
- For example the following Draft features can be used as profiles in a Part Loft
- Draft Polygon.
- Draft Point, Line, wire,
- Draft B-spline, Bezier Curve
- Draft Circle, Ellipse, Rectangle
- For example the following Draft features can be used as profiles in a Part Loft
- Draft Workbench features can be directly used as a profile in FreeCAD 0.14 or later.
- Schițe PartDesign Sketches
- The profile may be created with a sketch. However only a valid sketch will be shown in the list to be available for selection.
- The sketch must contain only one open or closed wire or line (can be multiple lines, if those lines are all connected as they are then a single wire)
- Atelierul Part Workbench
- the profile can be a valid Part geometric primitive which can be created with the Part CreatePrimitives tool
- De examplu următoarele primiteve geometrice Part pot fi un profil valid
- Punct (Vertex), Linie (Edge)
- Elice, Spirală
- Cerc, Elipsă
- Poligon Regulat
- Plan (Fațetă)
- De examplu următoarele primiteve geometrice Part pot fi un profil valid
- the profile can be a valid Part geometric primitive which can be created with the Part CreatePrimitives tool
- Closed Lofts
- Rezultatele loft-urilor închise pot fi neașteptate - mansarda/loft ul poate dezvolta răsuciri sau deformări. Lofting-ul este foarte sensibil la Plasamentul profilurilor și la complexitatea curbelor necesare pentru conectarea Vârfurilor corespunzătoare în toate profilurile.
An example Loft
Un exemplu de Loft
Instrumentul Loft este în Atelierul Part Workbench, meniul Part -> Loft... sau via iconița din bara de instrumente.
In the "Tasks" will be two lists: "node / wire" and "free form".
Selecția elementelor
In the "node / wire" the available items are displayed. Two elements must be selected one after the first in this list.
Thereafter, with the blue arrow that item is added to the list of "free form".
The selected items must be of the same type.
Tip: the active / selected items in the list are displayed in the 3D area as active / selected.
Command complete
Comanda completă
Dacă sunt selectate ambele elemente, comanda poate fi completată cu "OK".
Result
Rezultat
Din liniile închise obținem suprafețe care ar putea fi luate ca un aspect superficial pentru solide.
Dacă într-adevăr trebuie să creați un solid, utilizați butonul "Create Solid" sau după ce ați creat comutatorul Loft în tab-ul properties data și setați comutatorul "Solid" la True.
Procedura este aceeași cu cea descrisă mai sus cu polilinii deschise.
Changing the selection of sections
If you want to change the selection of the sections after creation of the loft, you can select the field Sections in the Data tab and click the occuring ellipsis button. The list of all selectable sections occurs, the current selection is highlighted. You can remove or add additional sections.
The sequence of sections depends on the sequence of clicks in the list. If you want to make substantial changes it is recommended to first deselect all and then start selection in the right order.
- Primitives: Box, Cylinder, Sphere, Cone, Torus, Tube, Create primitives, Shape builder
- Creation and modification: Extrude, Revolve, Mirror, Fillet, Chamfer, Make face from wires, Ruled Surface, Loft, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Thickness, Projection on surface, Attachment
- Boolean: Make compound, Explode Compound, Compound Filter, Boolean, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR
- Measure: Measure Linear, Measure Angular, Measure Refresh, Clear All, Toggle All, Toggle 3D, Toggle Delta

- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Draft, FEM, Image, Inspection, Mesh, OpenSCAD, Part, PartDesign, Path, Points, Raytracing, Reverse Engineering, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web
- Deprecated or unmaintained workbenches: Complete, Drawing, Robot
- Hubs: User hub, Power users hub, Developer hub