Part: Loft

From FreeCAD Documentation
Revision as of 17:48, 4 October 2023 by FuzzyBot (talk | contribs) (Updating to match new version of source page)

Loft

Posizione nel menu
Part → Loft...
Ambiente
Part
Avvio veloce
Nessuno
Introdotto nella versione
0.13
Vedere anche
Sweep

Description

The Part Loft command creates a face, a shell, or a solid shape from two or more profiles (cross-sections).

Part_Loft. Da tre profili di cui due sono Part_Circles e uno è Part_Ellipse. I parametri sono Solid "True" e Ruled "True"

Usage

  1. There are several ways to invoke the command:
    • Press the Loft... button.
    • Select the Part → Loft... option from the menu.
  2. The Loft task panel opens.
  3. In the Available Profiles list on the left select the first profile and click on the right arrow to place it in the Selected profiles list on the right.
  4. Repeat for the second profile and again if more than two profiles are desired.
  5. Optionally use the up and down arrows to reorder the selected profiles.
  6. Define options Create solid, Ruled surface, and Closed.
  7. Click OK.

Accepted geometry

Introduzione

Lo strumento Loft di FreeCAD (dell'ambiente Parte), viene utilizzato per creare una faccia, un guscio o una forma solida da due o più profili. I profili possono essere un punto (vertice), una linea (bordo), una spezzata o una faccia. I bordi e le polilinee possono essere di tipo aperto o chiuso. Ci sono varie limitazioni e complicazioni, descritte in seguito, tuttavia i profili possono provenire da primitive di Parte, da funzioni di Draft e da Schizzi.

Properties

See also: Property editor.

A Part Loft object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:

Data

Loft

  • DatiSections (LinkList): lists the sections used.
  • DatiSolid (Bool): true or false (default). True creates a solid.
  • DatiRuled (Bool): true or false (default). True creates a ruled surface.
  • DatiClosed (Bool): rue or false (default). True creates a closed loft by connecting last to first profile.
  • DatiMax Degree (IntegerConstraint): Maximum degree.

Create solid

Se "Solid" è "true" FreeCAD crea un solido se i profili sono una geometria chiusa, se è "false" crea una faccia oppure un guscio se c'è più di una faccia, sia per profili aperti che chiusi.

Ruled surface

Se "Ruled" è "true" FreeCAD crea una faccia, oppure delle facce o un solido dalle superfici rigate. Vedere la pagina Ruled surface in Wikipedia.

Closed

Se "Closed" è "true" FreeCAD tenta di collegare l'ultimo profilo al primo profilo per creare una figura chiusa.

Per ulteriori informazioni su come sono uniti i profili, fare riferimento alla pagina Dettagli tecnici di Part Loft.

Limitations

A Part Loft has the same limitations as a Part Sweep.

Closed Lofts

  • Loft chiusi
    • I risultati dei loft chiusi possono essere inaspettati - il loft può produrre torsioni o piegature. L'operazione Loft è molto sensibile al posizionamento dei profili e per collegare i corrispondenti vertici in tutti i profili servono curve molto complesse.