Návrh dílu Lineární vzorky
PartDesign LinearPattern |
Umístění Menu |
---|
PartDesign -> LinearPattern |
Pracovní stoly |
Návrh dílu, Complete |
Výchozí zástupce |
Nikdo |
Představen ve verzi |
- |
Viz také |
Nikdo |
Úvod
'Vytvořte lineární vzorek nějakého prvku' - Tento nástroj vezme sadu jednoho nebo více vybraných prvků jako vstup ('originály') a vytvoří z nich druhou sadu prvků přenesených v daném směru. Například:
Volby
Při vytváření lineárního vzorku prvku nabízí dialogové okno 'parametry lineárního vzorku' dva různé způsoby specifikování směru vzorku. Standardní osyJedna ze standardních os X, Y nebo Z múže být vybrána radio tlačítkem. Směr vzorku může být obrácen zakliknutím 'Opačný směr'. Vyběr plochyStisk tlačítka označeného 'Směr' umožňuje vybrat plochu nebo hranu z existujícího tělesa k určení směru. Je-li vybrána plocha, bude směr vzorku kolmý k této ploše. Připomínám, že tlačítko musí být stisknuto pokaždé při výběru nové plochy nebo hrany. Výběr originálůOkénko seznamu ukazuje 'originály', prvky, které jsou vybrány ke vzorkování. Kliknutí na libovolný prvek jej přidá do seznamu. Délka a VýskytyUrčuje délku, která má být pokryta vzorkem a celkový počet výskytů vzorků (včetně originálního prvku). Například šest výskytů v délce 150 dá šířku mezer mezi vzorky na 30 (150 děleno 5, protože mezer je 5 mezi celkovým počtem výskytů 6!). |
The PartDesign LinearPattern tool creates a linear pattern of one or more features.
An L-shaped pad (B) made on top of a base pad (A, also referred to as support) is used for a linear pattern. The result (C) is shown on the right.
Usage
Create
- Optionally activate the correct Body.
- Optionally select one or more features in the Tree view or the 3D view.
- There are several ways to invoke the tool:
- Press the LinearPattern button.
- Select the Part Design → Apply a pattern → LinearPattern option from the menu.
- If there is no active Body, and there are two or more Bodies in the document, the Active Body Required dialog will open and prompt you to activate one. If there is a single Body it will be activated automatically.
- If no features were selected the Select feature task panel opens: select one or more (hold down the Ctrl key) from the list and press the OK button.
- The LinearPattern parameters task panel opens. See Options for more information.
- Press the OK button to finish.
Edit
- Do one of the following:
- The LinearPattern parameters task panel opens. See Options for more information.
- Press the OK button to finish.
Options
- To add features:
- To remove features:
- If there are several features in the pattern, their order can be important. See PartDesign PolarPattern.
- Specify the Direction of the pattern:
- Normal sketch axis: The Z axis of the sketch (only available for sketch-based features).
- Vertical sketch axis: The Y axis of the sketch (idem).
- Horizontal sketch axis: The X axis of the sketch (idem).
- Construction line #: A separate entry for each construction line in the sketch (idem).
- Base X axis: The X axis of the Body.
- Base Y axis: The Y axis of the Body.
- Base Z axis: The Z axis of the Body.
- Select reference...: Select a Datum Line in the Tree view or a Datum Line or edge in the 3D view.
- Check the Reverse direction checkbox to reverse the pattern.
- Specify the Length from the start of the first occurrence to the start of the last occurrence.
- Specify the number of Occurrences (including the original feature).
- If the Update view checkbox is checked the view will update in real time.
Limitations
- Structure tools: Part, Group
- Helper tools: Create body, Create sketch, Edit sketch, Map sketch to face
- Modeling tools
- Datum tools: Create a datum point, Create a datum line, Create a datum plane, Create a local coordinate system, Create a shape binder, Create a sub-object(s) shape binder, Create a clone
- Additive tools: Pad, Revolution, Additive loft, Additive pipe, Additive helix, Additive box, Additive cylinder, Additive sphere, Additive cone, Additive ellipsoid, Additive torus, Additive prism, Additive wedge
- Subtractive tools: Pocket, Hole, Groove, Subtractive loft, Subtractive pipe, Subtractive helix, Subtractive box, Subtractive cylinder, Subtractive sphere, Subtractive cone, Subtractive ellipsoid, Subtractive torus, Subtractive prism, Subtractive wedge
- Transformation tools: Mirrored, Linear Pattern, Polar Pattern, Create MultiTransform, Scaled
- Dress-up tools: Fillet, Chamfer, Draft, Thickness
- Boolean: Boolean operation
- Extras: Migrate, Sprocket, Involute gear, Shaft design wizard
- Context menu: Set tip, Move object to other body, Move object after other object, Appearance, Color per face
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub