PartDesign AdditiveLoft/ru: Difference between revisions

From FreeCAD Documentation
(Created page with "=== Применение через диалог ===")
(Created page with "=== Применение в текущем Виде, напрямую ===")
Line 37: Line 37:
# Set options if needed and click {{Button|OK}}.
# Set options if needed and click {{Button|OK}}.


=== Применение в текущем Виде, напрямую ===
=== Selection-based workflow ===


{{Version|0.19}}
{{Version|0.19}}

Revision as of 21:04, 18 September 2021

Аддитивный профиль

Системное название
PartDesign_AdditiveLoft
Расположение в меню
Part Design → Create an additive feature → Аддитивный профиль
Верстаки
PartDesign
Быстрые клавиши
Нет
Представлено в версии
0.17
См. также
Аддитивная трубный профиль, Субтрактивный профиль

Описание

Additive Loft creates a solid in the active Body by making a transition between two or more sketches (also referred to as cross-sections). If the Body already contains features, the additive loft will be merged to them.

On the left: cross-sections (A), (B) and (C); created Additive loft on the right.

Применение

Применение через диалог

  1. Press the Additive loft button.
  2. In the Select feature dialog, select a sketch to be used as base profile object and click OK.
    • Alternatively, a single sketch can be selected prior to pressing the Additive loft button.
  3. In the Loft parameters, press the Add Section button.
  4. Select the next sketch in the 3D view. Repeat to select more sketches in the order you want them to be lofted through. (You can change the section order any time later in the loft dialog by dragging sections in the list to the desired position.introduced in version 0.19)
  5. Set options if needed and click OK.

Применение в текущем Виде, напрямую

introduced in version 0.19

  1. Select several sketches. It is hereby important in what order you select them:
    • The sketch selected at first will become the base profile object in the next step
    • The sketches selected after the first one will become the loft sections. Also here the selection order is important: The sketch selected as second will become the first loft section, the one selected as third becomes the second section and so on. (You can change the section order any time later in the loft dialog by dragging sections in the list to the desired position.introduced in version 0.19)
  2. Press the Additive loft button.
  3. Set options if needed and click OK.

Опции

  • Управление поверхностью: делает прямолинейные переходы между поперечными сечениями. Не оказывает никакого эффекта, в случае если профиль формируется только по двум поперечными сечениям. Если пункт не установлен, переходы между сечениями будут плавными.
  • Замкнуть форму: выполняет переход от последнего поперечного сечения к первому, создавая замкнутую форму.

Свойства

  • ДанныеLabel: name given to the operation, this name can be changed at convenience.
  • ДанныеSections: lists the sections used.
  • ДанныеRuled: see Options.
  • ДанныеClosed: see Options.
  • ДанныеRefine: true or false. If set to true, cleans the solid from residual edges left by features. See Part RefineShape for more details.
  • ДанныеProfile: the see base profile object of the loft.
  • ДанныеMidplane: non applicable.
  • ДанныеReversed: non applicable.
  • ДанныеUp To Face: non applicable.
  • ДанныеAllow Multi Face: non applicable.

Ограничения

  • Эскизы должны иметь замкнутые контуры.
  • Невозможно сделать профиль через в вершину.
  • Поперечное сечение не может лежать в той же плоскости, что и непосредственно предшествующее ему.
  • Чтобы лучше контролировать форму профиля, рекомендуется, чтобы все поперечные сечения имели одинаковое количество сегментов. Например, для профиля создаваемого между прямоугольником и окружностью окружность желательно разбить на 4 соединенные дуги.
  • Профиль будет создан в том порядке, в котором были добавлены поперечные сечения
  • Если эскиз имеет внутреннюю геометрию, т. е. в профиле должны быть отверстия, то порядок создания геометрии эскиза должен быть одинаковым для всех секций: либо начните все секции с внутренней геометрии, либо начните их все с внешней. В противном случае может быть создан некорректный профиль, в котором пересекаются внутренние и внешние стенки фигуры.

Известные проблемы

  • В некоторых режимах, при сбое деталь может стать черной

Ссылки