Mesh RemeshGmsh/it: Difference between revisions

From FreeCAD Documentation
(Created page with "==Note==")
(Created page with "==Proprietà==")
Line 38: Line 38:
* In some cases this command will produce a mesh with flipped normals. The [[Mesh_FlipNormals|Mesh FlipNormals]] command can be used to correct this.
* In some cases this command will produce a mesh with flipped normals. The [[Mesh_FlipNormals|Mesh FlipNormals]] command can be used to correct this.


==Properties==
==Proprietà==


See: [[Mesh_Feature|Mesh Feature]].
See: [[Mesh_Feature|Mesh Feature]].

Revision as of 21:33, 11 August 2020

Other languages:

Affinamento

Posizione nel menu
Mesh → Affinamento...
Ambiente
Mesh
Avvio veloce
Nessuno
Introdotto nella versione
0.19
Vedere anche
Crea mesh da una forma

Descrizione

Il comando Affinamento rigenera un oggetto mesh utilizzando il mesher Gmsh. La nuova mesh può essere più fine o più grossolana.

Utilizzo

  1. Select a single mesh object.
  2. Select the Meshes → Refinement... option from the menu.
  3. The Remesh by gmsh task panel opens.
  4. Specify the required settings. See the Gmsh mesher settings of the Mesh FromPartShape command.
  5. Press the Apply button to remesh the mesh object.
  6. Optionally change one or more settings and again press the Apply button until the new mesh is to your liking.
  7. Press the Close button to close the task panel and finish the command.

Note

  • In some cases this command will produce a mesh with flipped normals. The Mesh FlipNormals command can be used to correct this.

Proprietà

See: Mesh Feature.