Mesh RemeshGmsh/it: Difference between revisions

From FreeCAD Documentation
(Created page with "{{Docnav/it |Crea mesh da una forma |Valuta e ripara la mesh |Mesh |IconL=Mesh_FromPartShape.svg |IconR=...")
(Created page with "{{GuiCommand/it |Name=Mesh RemeshGmsh |Name/it=Affinamento |Empty=1 |MenuLocation=Mesh → Affinamento... |Workbenches=Mesh |Version=0.19 |SeeAlso=Mesh...")
Line 10: Line 10:
}}
}}


{{GuiCommand
{{GuiCommand/it
|Name=Mesh RemeshGmsh
|Name=Mesh RemeshGmsh
|Name/it=Affinamento
|Empty=1
|Empty=1
|MenuLocation=MeshesRefinement...
|MenuLocation=MeshAffinamento...
|Workbenches=[[Mesh_Workbench|Mesh]]
|Workbenches=[[Mesh_Workbench/it|Mesh]]
|Version=0.19
|Version=0.19
|SeeAlso=[[Mesh_FromPartShape|Mesh FromPartShape]]
|SeeAlso=[[Mesh_FromPartShape/it|Crea mesh da una forma]]
}}
}}



Revision as of 21:29, 11 August 2020

Other languages:

Affinamento

Posizione nel menu
Mesh → Affinamento...
Ambiente
Mesh
Avvio veloce
Nessuno
Introdotto nella versione
0.19
Vedere anche
Crea mesh da una forma

Descrizione

The Mesh RemeshGmsh command remeshes a mesh object using the Gmsh mesher. The new mesh can be finer or coarser.

Usage

  1. Select a single mesh object.
  2. Select the Meshes → Refinement... option from the menu.
  3. The Remesh by gmsh task panel opens.
  4. Specify the required settings. See the Gmsh mesher settings of the Mesh FromPartShape command.
  5. Press the Apply button to remesh the mesh object.
  6. Optionally change one or more settings and again press the Apply button until the new mesh is to your liking.
  7. Press the Close button to close the task panel and finish the command.

Notes

  • In some cases this command will produce a mesh with flipped normals. The Mesh FlipNormals command can be used to correct this.

Properties

See: Mesh Feature.