FEM Граничное условие скорости потока
FEM ConstraintFlowVelocity |
Системное название |
---|
FEM ConstraintFlowVelocity |
Расположение в меню |
Model → Fluid constraints → Constraint flow velocity |
Верстаки |
FEM |
Быстрые клавиши |
Нет |
Представлено в версии |
- |
См. также |
FEM tutorial |
Описание
Устанавливает скорость потока в качестве граничного условия к ребру в 2D или к грани в 3D.
Constraint flow velocity menus within the task panel
Применение
- There are several ways to invoke the command:
- Press the FEM ConstraintFlowVelocity button.
- Select the Model → Fluid Constraints → Constraint flow velocity option from the menu.
- The task panel will display menus for constraint flow velocity
- Select the target Edges or Faces.
- Press the Add button.
- Deselect "unspecified" to activate the necessary fields for edition.
- Fill in the values in mm/s for the main Cartesian components.
Примечания
- Компоненты вектора, отмеченные как неопределенные, будут интерполированы выбранным решателем.
- Любой вектор, который должен быть результатом решателя, должен быть помечен как неопределенный.
- Если целевая грань или ребро не выровнены с основной декартовой системой координат, можно поставить галочку нормаль к границе.
- Если установлен флажок нормаль к границе, вектор нормали к выбранному ребру или грани равен X, и он будет ориентирован от области сетки.
- Например, если в домен должен поступать поток воздуха со скоростью 20 мм/с, то после отметки нормаль к границе пользователь должен будет ввести -20 мм/с в поле скорость X.
- For a Wall with non-slip condition, the flow will be (0,0,0)
- For a Symmetry condition, the flow will be (0, Unspecified, Unspecified) if "normal to boundary" is ticked.
FEM
- Materials: Solid, Fluid, Nonlinear mechanical, Reinforced (concrete); Material editor
- Element geometry: Beam (1D), Beam rotation (1D), Shell (2D), Fluid flow (1D)
Constraints
- Electromagnetic: Electrostatic potential, Current density, Magnetization
- Geometrical: Plane rotation, Section print, Transform
- Mechanical: Fixed, Displacement, Contact, Tie, Spring, Force, Pressure, Centrif, Self weight
- Thermal: Initial temperature, Heat flux, Temperature, Body heat source
- Overwrite Constants: Constant vacuum permittivity
- Solve: CalculiX Standard, Elmer, Mystran, Z88; Equations: Deformation, Elasticity, Electrostatic, Electricforce, Magnetodynamic, Magnetodynamic 2D, Flow, Flux, Heat; Solver: Solver control, Solver run
- Results: Purge, Show; Postprocessing: Apply changes, Pipeline from result, Warp filter, Scalar clip filter, Function cut filter, Region clip filter, Contours filter, Line clip filter, Stress linearization plot, Data at point clip filter, Filter function plane, Filter function sphere, Filter function cylinder, Filter function box
- Additional: Preferences; FEM Install, FEM Mesh, FEM Solver, FEM CalculiX, FEM Concrete; FEM Element Types
Документация пользователя
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework