FEM RandbedingungStromdichte

From FreeCAD Documentation
Revision as of 11:56, 19 May 2023 by FuzzyBot (talk | contribs) (Updating to match new version of source page)
Other languages:

FEM RandbedingungStromdichte

Menüeintrag
Model → Electromagnetic Constraints → Constraint current density
Arbeitsbereich
FEM
Standardtastenkürzel
Keiner
Eingeführt in Version
1.0
Siehe auch
MagnetodynamischeGleichung, Magnetodynamische2DGleichung

Beschreibung

Erstellt eine FEM-Randbedingung für die Stromdichte, zur Verwendung mit der magnetodynamischen Gleichung und der magnetodynamischen 2D-Gleichung.

Anwendung

  1. Die Schaltfläche Constraint current density drücken oder den Menüeintrag Model → Electromagnetic Constraints → Constraint current density auswählen.
  2. In der 3D-Ansicht das Objekt auswählen, dem die Randbedingung zugeordnet werden soll.
  3. Die Schaltfläche Hinzufügen Drücken.

Optionen

  • Current density_*_1: The real/imaginary part of the current density in x-direction in A/m².
    For other coordinate systems than Cartesian 3D, this will be the first coordinate of the system instead of x.
  • Current density_*_2: The real/imaginary part of the current density in y-direction in A/m².
    For other coordinate systems than Cartesian 3D, this will be the second coordinate of the system instead of y.
  • Current density_*_3: The real/imaginary part of the current density in z-direction in A/m².
    For other coordinate systems than Cartesian 3D, this will be the third coordinate of the system instead of z. If the coordinate system has no third coordinate, this setting will be ignored.
  • Current density_*_*_Disabled: Whether the corresponding parameter is disabled (assumed as unknown by the solver).