Draft Snap Parallel/tr: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 25: Line 25:
This method snaps to a point on an imaginary line that is parallel to another line segment.
This method snaps to a point on an imaginary line that is parallel to another line segment.


[[Image:Draft Snap Parallel.png|400px]]
[[Image:Draft_Snap_Parallel_example.png|400px]]
{{Caption|Snapping the second point of a line to an invisible line that is parallel to the reference line}}
{{Caption|Snapping the second point of a line to an invisible line that is parallel to the reference line}}



Revision as of 14:51, 1 December 2020

Taslak Paralel

Menü konumu
Taslak → Yakalama → Paralel
Tezgahlar
Taslak, Mimari
Varsayılan kısayol
Hiçbiri
Versiyonda tanıtıldı
-
Ayrıca bkz
Hiçbiri

Açıklama

Bu Yakalama modu, hayali bir çizgi üzerinde çizgi parçasına paralel bir nokta seçmenizi sağlar.

This method snaps to a point on an imaginary line that is parallel to another line segment.

Snapping the second point of a line to an invisible line that is parallel to the reference line

Kullanın

  1. Yakalama modunun açık olduğundan emin olun
  2. FreeCAD belgeside işlem yapılacak bileşeni seçin
  1. Make sure Draft ToggleSnap and Snap Parallel are turned on.
  2. Choose Draft Line to draw a shape. Enter the first point.
  3. Hover the cursor over the line segment that you wish to use as reference.
  4. Move the cursor away, trying to keep the same slope as the reference line until the snap symbol appears.
  5. Click to attach your new point.