Draft: Facebinder
Draft Facebinder |
poziția meniului |
---|
Draft → Facebinder |
Ateliere |
Draft, Arch |
scurtătură |
F F |
Prezentat în versiune |
- |
A se vedea, de asemenea, |
nici unul |
Descriere
Facebinderul este un obiect foarte simplu, construit din fațetele selectate ale altor obiecte. Este parametric, puteți modifica obiectul original și actualizările obiectului facebinder în consecință. Acesta poate fi apoi folosit, de exemplu, pentru a face o extrudare dintr-o colecție de fațete de la alte obiecte. O utilizare tipică este în designul arhitectural, pentru a construi un obiect care acoperă mai multe bucăți de pereți. Puteți mișca și roti în jurul fațetei după crearea ei, totul va rămâne legat de fațetele originale.
It can be used to create an extrusion from a collection of faces. This extrusion can for example represent a wall finish in architectural design.
Facebinder created from the faces of walls
Cum se folosește
- Selectați fețetele pe obiecte (utilizați CTRL pentru a selecta mai multe fețe)
- Apăsați butonul 16px Facebinder, sau apăsați tatele F, F
Notes
- A Draft Facebinder can be edited with the Draft Edit command.
Properties
See also: Property editor.
A Draft Facebinder object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:
Data
Draft
- DateArea (
Area
): (read-only) specifies the total area of the linked faces of the facebinder. - DateExtrusion (
Distance
): specifies the extrusion thickness of the facebinder. - DateFaces (
LinkSubList
): specifies the linked faces of the facebinder. - DateOffset (
Distance
): specifies an offset distance to apply between the facebinder and the original faces, prior to extrusion. - DateRemove Splitter (
Bool
): Specifies whether to remove splitter lines that divide co-planar faces of the facebinder. - DateSew (
Bool
): Specifies whether to perform a topological sewing operation on the facebinder.
View
Draft
- VizualizarePattern (
Enumeration
): specifies the Draft Pattern with which to fill the faces of the facebinder. This property only works if VizualizareDisplay Mode isFlat Lines
. - VizualizarePattern Size (
Float
): specifies the size of the Draft Pattern.
Scripting
Scrip-Programare
Instrumentul Facebinder poate fi folosit în scripturile python și macros utilizând următoarea funcție:
facebinder = make_facebinder(selectionset)
- Creează un obiect facebinder din setul de selecție dat, care este o listă de obiecte de selecție, cum ar fi returnate de metoda FreeCADGui.Selection.getSelectionEx ().
- Sunt luate în considerare doar fețele selectate
- Returnează obiectul nou creat
PropertyLinkSubList = [tuple1, tuple2, tuple3, ...]
PropertyLinkSubList = [(object1, list1), (object2, list2), (object3, list3), ...]
PropertyLinkSubList = [(object1, ['Face1', 'Face4', 'Face6']), ...]
PropertyLinkSubList = [(object1, ('Face1', 'Face4', 'Face6')), ...]
The thickness of the Facebinder can be added by overwriting its Extrusion
attribute; the value is entered in millimeters.
The placement of the Facebinder can be changed by overwriting its Placement
attribute, or by individually overwriting its Placement.Base
and Placement.Rotation
attributes.
Exempluː
import FreeCAD as App
import FreeCADGui as Gui
import Draft
doc = App.newDocument()
# Insert a solid box
box = doc.addObject("Part::Box", "Box")
box.Length = 2300
box.Width = 800
box.Height = 1000
# selection = Gui.Selection.getSelectionEx()
selection = [(box, ("Face1", "Face6"))]
facebinder = Draft.make_facebinder(selection)
facebinder.Extrusion = 50
doc.recompute()
facebinder.Placement.Base = App.Vector(1000, -1000, 100)
facebinder.ViewObject.ShapeColor = (0.99, 0.99, 0.4)
doc.recompute()
- Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
- Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
- Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path link array, Point array, Point link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to sketch, Set slope, Flip dimension, Shape 2D view
- Draft Tray: Select plane, Set style, Toggle construction mode, AutoGroup
- Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid
- Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Show snap toolbar
- Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
- Context menu:
- Layer container: Merge layer duplicates, Add new layer
- Layer: Activate this layer, Select layer contents
- Text: Open hyperlinks
- Wire: Flatten
- Working plane proxy: Write camera position, Write objects state
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub