Sketcher: constrângere de simetrie
Sketcher ConstrainSymmetric |
Menu location |
---|
Sketch → Sketcher constraints → Constrain symmetrical |
Workbenches |
Sketcher |
Default shortcut |
S |
Introduced in version |
- |
See also |
Constraint Parallel |
Descriere
Constrângerea de simetrie obligă două puncte selectate pentru a deveni simetrice cu o anumită linie de simetrie, adică două puncte selectate sunt constrânse să stea pe o linie normală care trece prin cele două puncte și sunt constrânse să fie echidistan0te față de linia de simetrie. Alternativ, poate forța două puncte să fie simetrice față de al treilea.
Utilizare
Selectați două puncte (vârfuri) din schiță și o linie din schiță. Punctele selectate și linia vor fi verde închis.
Click pe iconița SymmetricalConstraint în bara de instrumente Sketcher sau selectați elementul de meniu Constrain Symmetrical din submeniul Sketcher Costraint din elementul de meniu Sketcher (sau Part Design).
Aceasta va aplica constrângerea elementelor selectate.
Aceasta este o constrângere geometrică și nu are parametri editabili.
Select two points (vertexes) in the sketch and a line in the sketch. The selected points and the line will be dark green.
Click on the SymmetricalConstraint icon in the Sketcher toolbar or select the Constrain Symmetrical menu item from the Sketcher Constraints sub menu of the Sketcher (or Part Design) menu item.
This will apply the constraint to the selected items.
Note: if you want to define a symmetry constraint with respect to a point, the order of the selection is important, depending on if you select the tool at the beginning or at the end.
- If you click the tool first: select the first point, then the symmetry reference point, and finally the second point.
- If you click the tool last: select the first point, then the second point, and finally the symmetry reference point.
See the tracker issue #4144, and forum thread.
- General: Create sketch, Edit sketch, Attach sketch, Reorient sketch, Validate sketch, Merge sketches, Mirror sketch, Leave sketch, View sketch, View section, Toggle grid, Toggle snap, Configure rendering order, Stop operation
- Sketcher geometries: Point, Polyline, Line, Arc, Arc by 3 points, Arc of ellipse, Arc of hyperbola, Arc of parabola, Circle, Circle by 3 points, Ellipse, Ellipse by 3 points, Rectangle, Centered rectangle, Rounded rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Regular polygon, Slot, Arc slot, B-spline by control points, Periodic B-spline by control points, B-spline by knots, Periodic B-spline by knots, Toggle construction geometry
- Sketcher constraints:
- Dimensional constraints: Dimension, Horizontal distance, Vertical distance, Distance, Auto radius/diameter, Radius, Diameter, Angle, Lock
- Geometric constraints: Coincident (unified), Coincident, Point on object, Horizontal/vertical, Horizontal, Vertical, Parallel, Perpendicular, Tangent or collinear, Equal, Symmetric, Block
- Other constraints: Refraction (Snell's law)
- Constraint tools: Toggle driving/reference constraint, Activate/deactivate constraint
- Sketcher tools: Fillet, Chamfer, Trim, Split, Extend, External geometry, Carbon copy, Select origin, Select horizontal axis, Select vertical axis, Array transform, Polar transform, Scale transform, Offset geometry, Symmetry, Remove axes alignment, Delete all geometry, Delete all constraints
- Sketcher B-spline tools: Convert geometry to B-spline, Increase B-spline degree, Decrease B-spline degree, Increase knot multiplicity, Decrease knot multiplicity, Insert knot, Join curves
- Sketcher visual: Select unconstrained DoF, Select associated constraints, Select associated geometry, Select redundant constraints, Select conflicting constraints, Show/hide circular helper for arcs, Show/hide B-spline degree, Show/hide B-spline control polygon, Show/hide B-spline curvature comb, Show/hide B-spline knot multiplicity, Show/hide B-spline control point weight, Show/hide internal geometry, Switch virtual space
- Additional: Sketcher Dialog, Preferences, Sketcher scripting
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub