PartDesign Фаска
Фаска |
Системное название |
---|
PartDesign_Chamfer |
Расположение в меню |
Part Design → Apply a dress-up feature → Фаска |
Верстаки |
PartDesign |
Быстрые клавиши |
Нет |
Представлено в версии |
- |
См. также |
Скругление, Фаска |
Описание
The PartDesign Chamfer tool creates chamfers on the selected edges of an object. It adds a Chamfer object to the document with its corresponding representation in the Tree view.
Применение
Add a chamfer
- Optionally activate the Body to chamfer.
- There are several ways to select edges to chamfer:
- Select one or more edges of the Body individually.
- Select one or more faces of the Body to select all their edges.
- Select a feature (usually the last feature) of the Body to select all its edges. introduced in version 0.20
- For a chain of tangentially connected edges only a single edge needs to be selected, the chamfer will propagate along the chain.
- There are several ways to invoke the tool:
- Press the Chamfer button.
- Select the Part Design → Apply a dress-up feature → Chamfer option from the menu.
- If there is no active Body, and there are two or more Bodies in the document, the Active Body Required dialog will open and prompt you to activate one. If there is a single Body it will be activated automatically.
- The Chamfer parameters task panel opens. See Options for more information.
- Press the OK button to finish.
Edit a chamfer
- Do one of the following:
- The Chamfer parameters task panel opens. See Options for more information.
- Press the OK button to finish.
Options
- To add edges do one of the following:
- Press the Add button to start selecting edges and/or faces in the 3D view.
- To select all remaining edges do the following:
- If required press the Add button.
- Use the Ctrl+Shift+A keyboard shortcut, or right-click the list and select Add all edges from the context menu. introduced in version 0.20
- To remove edges do one of the following:
- Press the Remove button to start deselecting edges and/or faces in the 3D view. Selected elements are highlighted in purple.
- Select one or more elements in the list and press the Del key, or right-click the list and select Remove from the context menu.
- Specify a chamfer Type:
- Equal distance: One distance is used to place both chamfer edges.
- Two distances: Two distances are used to place the chamfer edges. introduced in version 0.19
- Distance and angle: A distance is used to place one chamfer edge, the placement of the other chamfer edge is defined by the angle of the chamfer. introduced in version 0.19
- Press the Flip direction button to flip the direction of the chamfer (deactivated for Equal distance). introduced in version 0.19
- Set the Size of the chamfer.
- Set the Size2 of the chamfer (only available if Two distances is selected).
- Set the Angle of the chamfer (only available if Distance and angle is selected).
- Check the Use all edges checkbox to select all edges of the previous feature. This deactivates the selection list and the related buttons. introduced in version 0.20
Notes
- PartDesign Chamfer should not be confused with Part Chamfer. Unless you know what you are doing, Part Chamfer should not be used on a PartDesign Body. See Part and PartDesign.
- Chamfers cannot completely consume the adjacent faces.
Properties
See also: Property editor.
A PartDesign Chamfer object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:
Data
Base
- ДанныеBase (
LinkSub
): Link to the selected edges and faces of the parent feature. Can be a link to only the parent feature if ДанныеUse All Edges istrue
. - ДанныеSupport Transform (
Bool
): Iftrue
the chamfered shape of the additive/subtractive parent feature will be used when the chamfer object is included in a pattern, else only the shape of the chamfer itself will be used. The default isfalse
. - Данные (hidden)Add Sub Shape (
PartShape
) - Данные (hidden)Base Feature (
Link
): Link to the parent feature. - Данные (hidden)_ Body (
LinkHidden
): Link to the parent body.
Chamfer
- ДанныеCamfer Type (
Enumeration
): The chamfer type:Equal distance
(default),Two distances
orDistance and Angle
. - ДанныеSize (
QuantityConstraint
): The first chamfer distance. The default is1 mm
. - ДанныеSize2 (
QuantityConstraint
): The second chamfer distance. Only used if ДанныеCamfer Type isTwo distances
. The default is1 mm
. - ДанныеAngle (
Angle
): The chamfer angle. Only used if ДанныеCamfer Type isDistance and Angle
. The default is45 °
. - ДанныеFlip Direction (
Bool
): Iftrue
the direction of the chamfer is flipped. Not used if ДанныеCamfer Type isEqual distance
. The default isfalse
. - ДанныеUse All Edges (
Bool
): Iftrue
all edges of the feature are chamfered, and the edges specified by ДанныеBase are ignored. The default isfalse
.
Part Design
- ДанныеRefine (
Bool
): Iftrue
redundant edges are removed from the result of the operation. The default value is determined by the Automatically refine model after sketch-based operation preference. See PartDesign Preferences.
Known issues
See PartDesign Fillet.
PartDesign
- Инструменты структуры: Part, Group
- Вспомогательные инструменты: Create body, Create sketch, Edit sketch, Map sketch to face
- Инструменты моделирования
- Инструменты данных: Create a datum point, Create a datum line, Create a datum plane, Create a local coordinate system, Create a shape binder, Create a clone
- Аддитивные инструменты: Pad, Revolution, Additive loft, Additive pipe, Additive box, Additive cone, Additive cylinder, Additive ellipsoid, Additive prism, Additive sphere, Additive torus, Additive wedge
- Субстрактивные инструменты: Pocket, Hole, Groove, Subtractive loft, Subtractive pipe, Subtractive box, Subtractive cone, Subtractive cylinder, Subtractive ellipsoid, Subtractive prism, Subtractive sphere, Subtractive torus, Subtractive wedge
- Инструменты трансформации: Mirrored, Linear Pattern, Polar Pattern, Create MultiTransform
- Отделочные инструменты: Fillet, Chamfer, Draft, Thickness
- Бинарные: Boolean operation
- Дополнительно: Migrate, Shaft design wizard, Involute gear
- Инструменты контекстного меню: Set tip, Move object to other body, Move object after other object
Документация пользователя
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework