Croquizador Dividir
Sketcher Split |
Menu location |
---|
Croquis → Croquizador Geometrías → Dividir |
Workbenches |
Croquizador |
Default shortcut |
None |
Introduced in version |
0.20 |
See also |
Croquizador Recortar |
Descripción
Esta herramienta permite dividir un borde en dos idénticas, mientras que la mayoría de las restricciones se duplican, por lo que ambas partes permanecen restringidas aparte de la posición del punto de división. En el caso especial de un círculo, éste se convierte en un arco de extremos sueltos, transfiriéndose las restricciones existentes del círculo al nuevo arco.
Utilización
- Pulse el Dividir. El puntero del ratón se convierte en una cruz blanca con un símbolo rojo de división.
- Haz clic en el borde en el lugar donde quieres dividirla.
- A partir de los bordes de línea y arco, se crearán dos nuevas, conectadas en el punto pulsado. Un círculo se convierte en un arco con el mismo punto central y otras restricciones que tenía el círculo original.
- Pulsando Esc o el botón derecho del ratón terminará la función.
Limitaciones
- For ellipse, parabola, hyperbola and B-splines the action is not yet supported.
Notas
- All coincidences are transferred - start point, end point and center point (if applicable).
- Point on object constraint is transferred to the closer newly created edge.
- Vertical and horizontal constraints are copied to both offsprings.
- Parallel and perpendicular constraints are copied for both line segments, for arc only once, to the closer part.
- Equality constraint is transferred only for resulting arc edges, line segments do not receive it.
- Symmetry constraint is currently not transferred.
- Block constraint is currently not transferred.
- Horizontal, vertical and length constraints between points are transferred to the outer points of the new edges.
- Point distance constraint is assigned only once, to the closer edge segment.
- Radius and diameter constraints are copied to any resulting arc.
- Angle constraint is currently not transferred
Sketcher
- General: Create sketch, Edit sketch, Attach sketch, Reorient sketch, Validate sketch, Merge sketches, Mirror sketch, Leave sketch, View sketch, View section, Toggle grid, Toggle snap, Configure rendering order, Stop operation
- Sketcher geometries: Point, Polyline, Line, Arc, Arc by 3 points, Arc of ellipse, Arc of hyperbola, Arc of parabola, Circle, Circle by 3 points, Ellipse, Ellipse by 3 points, Rectangle, Centered rectangle, Rounded rectangle, Triangle, Square, Pentagon, Hexagon, Heptagon, Octagon, Regular polygon, Slot, Arc slot, B-spline by control points, Periodic B-spline by control points, B-spline by knots, Periodic B-spline by knots, Toggle construction geometry
- Sketcher constraints:
- Dimensional constraints: Dimension, Horizontal distance, Vertical distance, Distance, Auto radius/diameter, Radius, Diameter, Angle, Lock
- Geometric constraints: Coincident (unified), Coincident, Point on object, Horizontal/vertical, Horizontal, Vertical, Parallel, Perpendicular, Tangent or collinear, Equal, Symmetric, Block
- Other constraints: Refraction (Snell's law)
- Constraint tools: Toggle driving/reference constraint, Activate/deactivate constraint
- Sketcher tools: Fillet, Chamfer, Trim, Split, Extend, External geometry, Carbon copy, Select origin, Select horizontal axis, Select vertical axis, Array transform, Polar transform, Scale transform, Offset geometry, Symmetry, Remove axes alignment, Delete all geometry, Delete all constraints
- Sketcher B-spline tools: Convert geometry to B-spline, Increase B-spline degree, Decrease B-spline degree, Increase knot multiplicity, Decrease knot multiplicity, Insert knot, Join curves
- Sketcher visual: Select unconstrained DoF, Select associated constraints, Select associated geometry, Select redundant constraints, Select conflicting constraints, Show/hide circular helper for arcs, Show/hide B-spline degree, Show/hide B-spline control polygon, Show/hide B-spline curvature comb, Show/hide B-spline knot multiplicity, Show/hide B-spline control point weight, Show/hide internal geometry, Switch virtual space
- Additional: Sketcher Dialog, Preferences, Sketcher scripting
User documentation
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub