Part: Cerchio
Part Cerchio |
Posizione nel menu |
---|
Parte → Crea primitive → Cerchio |
Ambiente |
Part, OpenSCAD |
Avvio veloce |
Nessuno |
Introdotto nella versione |
- |
Vedere anche |
Part Primitive |
Descrizione
Un Part Cerchio è una forma parametrica che può essere creata con il comando Part Primitive . Nel sistema di coordinate definito dalla sua proprietà DatiPlacement, il cerchio giace sul piano XY con il centro nell'origine.
Un Part Cerchio è infatti un arco circolare chiuso in senso antiorario, può essere trasformato in un arco modificando le sue proprietà DatiAngle1 e/o DatiAngle2.
Utilizzo
Vedere Part Primitive.
In alternativa è possibile creare un cerchio parziale selezionando tre punti:
- Nel pannello delle azioni del comando Part Primitive selezionare l'opzione Cerchio dal menu a tendina.
- Premere il pulsante Da tre punti.
- Selezionare tre vertici nella Vista 3D. Non è necessario tenere premuto il tasto Ctrl.
- Viene creato un cerchio.
- I vertici selezionati vengono utilizzati solo al momento della creazione per calcolare il DatiRadius e il DatiPlacement del cerchio.
Esempio
A Part Circle object created with the scripting example below is shown here.
Proprietà
See also: Property editor.
A Part Circle object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:
Data
Attachment
The object has the same attachment properties as a Part Part2DObject.
Base
- Raggio: il raggio del bordo curvo (arco o cerchio)
- Angolo 1: inizio del bordo curvo, (gradi in senso antiorario), il valore di default è 0
- Angolo 2: fine del bordo curvo (gradi in senso antiorario), il valore di default è 360
Scripting
See also: Autogenerated API documentation, Part scripting and FreeCAD Scripting Basics.
A Part Circle can be created with the addObject()
method of the document:
circle = FreeCAD.ActiveDocument.addObject("Part::Circle", "myCircle")
- Where
"myCircle"
is the name for the object. - The function returns the newly created object.
Example:
import FreeCAD as App
doc = App.activeDocument()
circle = doc.addObject("Part::Circle", "myCircle")
circle.Radius = 10
circle.Angle1 = 45
circle.Angle2 = 225
circle.Placement = App.Placement(App.Vector(1, 2, 3), App.Rotation(30, 45, 10))
doc.recompute()
- Primitives: Box, Cylinder, Sphere, Cone, Torus, Tube, Create primitives, Shape builder
- Creation and modification: Extrude, Revolve, Mirror, Scale, Fillet, Chamfer, Make face from wires, Ruled Surface, Loft, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Thickness, Projection on surface, Attachment
- Boolean: Make compound, Explode Compound, Compound Filter, Boolean, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework
- Hubs: User hub, Power users hub, Developer hub