사용자 도움말 종합 안내

From FreeCAD Documentation
Revision as of 03:46, 15 September 2023 by JYSEO2016 (talk | contribs)


여기는 FreeCAD 를 처음 사용하는 데 필요한 도움말의 요약 또는 종합 한 것 입니다.

FreeCAD 는 계속 개발하고 있는 상태라서, 오래 된 또는 누락 된 것이 있을 수 있습니다. 필요한 정보를 찾을 수 없다면, 망설일 필요없이 FreeCAD forum 에서 요청하시기 바랍니다.

FreeCAD 에 기여하고 싶다면, 기부, 와 Help FreeCAD 페이지에 기여하는 여러가지 방법들을 읽어 보시기 바랍니다. 이 위키를 편집하고 싶다면, 여러분의 위키 계정과 문서 편집이 가능한 등급으로 설정해 줄 것을 포럼에서 관리자에게 PM(개인간 메시지)으로 요청하고, 위키 페이지 에서 지켜야 할 규칙을 읽어 보세요.

몇 년 전에 FreeCAD가 어떻게 시작되었는지 알고 싶으면 연혁 페이지를 방문하세요.

FreeCAD 사용하기

기본 사항

다른 프로그램의 파일을 들여오는 방법?

기본적인 사용방법들

분야별 작업환경

Workbenches are collections of tools used for specific tasks. These are the base workbenches bundled with every FreeCAD installation:

  • Standard tools. These commands and tools are present in all workbenches.
  • The FEM Workbench provides Finite Element Analysis (FEA) workflow.
  • The Inspection Workbench is made to give you specific tools for examination of shapes. Still in the early stages of development.
  • The Part Workbench for working with geometric primitives and boolean operations.
  • The Reverse Engineering Workbench is intended to provide specific tools to convert shapes/solids/meshes into parametric FreeCAD-compatible features.

매크로

매크로 는 단순한 또는 복잡하지만 프리캐드의 기본 시스템에 없는, 기능을 하도록 파이썬 으로 작성한 단편 규모의 코드 입니다.

Power users have written various macros to enhance FreeCAD with more capabilities.

Since FreeCAD 0.17, many macros can be installed using the Addon Manager. For a list of the macros refer to the Macros recipes page. For manual installation see How to install macros.

남 다른 작업환경 만들기

When many macros or functions are developed together, and are organized in toolbars and menus, they can become a new workbench.

External workbenches are collections of functions that are not part of the base FreeCAD system, usually developed by experienced users, and targeting a particular need.

버젼 FreeCAD 0.17 부터는, Addon Manager 를 이용하여 여러가지 작업환경들을 설치할 수 있게 되었습니다. 손수 설치 하는 방법에 관해서는 작업환경을 추가 하는 방법 을 읽어 보세요.

참조

온라인 도움말

This is the official FreeCAD online help. Please note that the whole online help system is currently being reworked. It will be used to generate a .CHM file, that will be distributed with the binary packages of FreeCAD. At the moment the online help summarizes some of the most complete sections of this wiki.

기타사항

  • The Power users hub is the place to go if you would like to see more advanced use of FreeCAD
  • The FreeCAD Community Portal lists projects made by community members around FreeCAD.
  • FreeCAD 용어를 이해 못하시면? 어휘 페이지를 보세요.