Sketcher StopOperation/pt-br: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 18: Line 18:
==Description==
==Description==


{{Button|[[File:Sketcher_StopOperation.svg|16px]] [[Sketcher_StopOperation|Stop operation]]}} stops a currently active command while a sketch is being edited; this may mean a drawing operation, a constraining operation, a B-spline operation, etc.
The [[Image:Sketcher_StopOperation.svg|16px]] [[Sketcher_StopOperation|Sketcher StopOperation]] tool stops any currently running geometry or constraint creation tool.

This is similar to pressing the {{KEY|Esc}} key.


==Usage==
==Usage==


See also: [[Sketcher_Workbench#Continue_modes|Continue modes]].
# Make sure a [[Sketch|sketch]] is in {{Button|[[File:Sketcher_EditSketch.svg|16px]] [[Sketcher_EditSketch|Edit mode]]}}.

# Make sure a tool is active such as {{Button|[[File:Sketcher_CreatePolyline.svg|16px]] [[Sketcher_CreatePolyline|Create polyline]]}}, {{Button|[[File:Sketcher_ConstrainDistanceY.svg|16px]] [[Sketcher_ConstrainDistanceY|Constrain distance Y]]}}, or {{Button|[[File:Sketcher_Move.svg|16px]] [[Sketcher_Move|Move]]}}.
# Make sure a geometry or constraint creation tool is active.
# Choose {{MenuCommand|Sketch → [[File:Sketcher_StopOperation.svg|16px]] [[Sketcher_StopOperation|Stop operation]]}} from the top menu.
# Select the {{MenuCommand|Sketch → [[Image:Sketcher_StopOperation.svg|16px]] Stop operation}} option from the menu.
# The tool is deactivated and the pointer returns to being a simple pointer.
# The running tool is deactivated and the cursor changes to a simple arrow.





Revision as of 11:24, 27 March 2024

Sketcher StopOperation

Menu location
Sketch → Stop operation
Workbenches
Sketcher
Default shortcut
None
Introduced in version
-
See also
None

Description

The Sketcher StopOperation tool stops any currently running geometry or constraint creation tool.

Usage

See also: Continue modes.

  1. Make sure a geometry or constraint creation tool is active.
  2. Select the Sketch → Stop operation option from the menu.
  3. The running tool is deactivated and the cursor changes to a simple arrow.