Sketcher StopOperation/es: Difference between revisions

From FreeCAD Documentation
(Created page with "{{GuiCommand/es |Name=Sketcher StopOperation |Name/es=Croquizador DetenerOperación |Workbenches=Croquizador |MenuLocation=Dibujo → Detener Operaci...")
(Created page with "==Descripción==")
Line 8: Line 8:
}}
}}


==Description==
==Descripción==


{{Button|[[File:Sketcher_StopOperation.svg|16px]] [[Sketcher_StopOperation|Stop operation]]}} stops a currently active command while a sketch is being edited; this may mean a drawing operation, a constraining operation, a B-spline operation, etc.
{{Button|[[File:Sketcher_StopOperation.svg|16px]] [[Sketcher_StopOperation|Stop operation]]}} stops a currently active command while a sketch is being edited; this may mean a drawing operation, a constraining operation, a B-spline operation, etc.

Revision as of 23:03, 2 December 2020

Croquizador DetenerOperación

Ubicación en el Menú
Dibujo → Detener Operación
Entornos de trabajo
Croquizador
Atajo de teclado por defecto
Ninguno
Introducido en versión
-
Ver también
Ninguno

Descripción

Stop operation stops a currently active command while a sketch is being edited; this may mean a drawing operation, a constraining operation, a B-spline operation, etc.

This is similar to pressing the Esc key.

Usage

  1. Make sure a sketch is in Edit mode.
  2. Make sure a tool is active such as Create polyline, Constrain distance Y, or Move.
  3. Click on Stop operation or choose Sketch → Stop operation from the top menu.
  4. The tool is deactivated and the pointer returns to being a simple pointer.