Sketcher NewSketch/fr: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
Line 56: Line 56:
# A sketch is created.
# A sketch is created.
# The sketch is put in edit mode and the [[Sketcher_Dialog|Sketcher Dialog]] opens.
# The sketch is put in edit mode and the [[Sketcher_Dialog|Sketcher Dialog]] opens.
# To finish edit mode see [[Sketcher_LeaveSketch|Sketcher LeaveSketch]].
# To finish edit mode see [[Image:Sketcher_LeaveSketch.svg|16px]] [[Sketcher_LeaveSketch|Sketcher LeaveSketch]].


==Notes==
==Notes==

Revision as of 22:32, 27 March 2024

Sketcher Créer une esquisse

Emplacement du menu
Esquisse → Créer une esquisse
Ateliers
Sketcher
Raccourci par défaut
Aucun
Introduit dans la version
-
Voir aussi
PartDesign Esquisse, Sketcher Esquisse sur une face, Sketcher Réorienter une esquisse

Description

Cela créera une nouvelle esquisse.

Notez que l' atelier PartDesign a son propre outil Esquisse. Lorsque vous travaillez sur un PartDesign Corps, il est préférable d'utiliser cet outil.

Utilisation

  1. If the sketch should be attached to existing geometry: select an object with a shape, or one or more vertices, edges, and/or faces, and/or a plane.
  2. There are several ways to invoke the tool:
    • Press the Create sketch button.
    • Select the Sketch → Create sketch option from the menu.
  3. If geometry has been selected:
    1. The Sketch attachment dialog opens.
    2. Select an attachment method from the dropdown list. Or select Don't attach to ignore the selection.
    3. Press the OK button.
  4. If there is no selection, or Don't attach has been selected in the previous step:
    1. The Choose orientation dialog opens.
    2. Specify the plane for the orientation. The plane is relative to the local coordinate system the sketch is in:
      • If the Reverse direction checkbox is not checked:
        • Top: XY-Plane
        • Front: XZ-Plane
        • Right: YZ-Plane
      • If the Reverse direction checkbox is checked:
        • Bottom: XY-Plane
        • Rear: XZ-Plane
        • Left: YZ-Plane
    3. Optionally change the Offset. The offset is measured along the Z, Y or X axis of the local coordinate system.
    4. Press the OK button.
  5. A sketch is created.
  6. The sketch is put in edit mode and the Sketcher Dialog opens.
  7. To finish edit mode see Sketcher LeaveSketch.

Notes