Sketcher CreatePoint/zh-cn: Difference between revisions

From FreeCAD Documentation
(Created page with "不能在草图的范围之外创建点。如需在3D视图中创建点,请以零件工作台中的点工具(PartDesign Point)创建基准点,或...")
(Created page with "可通过设置草图首选项(Sketcher Preferences)中的选项在捕捉网格模式下创建点。此时,如果所创点距网格线的距离...")
Line 18: Line 18:
==选项==
==选项==


可通过设置[[Sketcher_Preferences|草图首选项(Sketcher Preferences)]]中的选项在捕捉网格模式下创建点。此时,如果所创点距网格线的距离小于网格间距的25%,则将被捕捉至网格上。
A mode to snap to the grid can be set in the [[Sketcher_Preferences|Sketcher Preferences]]. The point snaps then to the grid, if it has less than 25% grid distance to a grid line.
The snap mode does not fix them to the grid. The points can be moved with the mouse or constraints to other locations.
The snap mode does not fix them to the grid. The points can be moved with the mouse or constraints to other locations.



Revision as of 10:12, 11 July 2019

Sketcher CreatePoint

Menu location
Sketch → Sketcher geometries → Create point
Workbenches
Sketcher
Default shortcut
None
Introduced in version
-
See also
None

描述

通过此点工具可在当前的草图中创建一个点,而所创建的点可作为构造几何图形的元素。创建的点将一直作为构造要素,且不会在3D视图中显示出来。

Point in the sketcher

如何使用

  • 点击 Create point按钮来激活此功能。
  • 通过在草图中单击来创建一个点。
  • Esc键或点击鼠标右键来关闭此功能。

选项

可通过设置草图首选项(Sketcher Preferences)中的选项在捕捉网格模式下创建点。此时,如果所创点距网格线的距离小于网格间距的25%,则将被捕捉至网格上。 The snap mode does not fix them to the grid. The points can be moved with the mouse or constraints to other locations.

限制

不能在草图的范围之外创建点。如需在3D视图中创建点,请以零件工作台中的点工具(PartDesign Point)创建基准点,或用零件工作台中的点工具(Part Point)加以取代。