Sketcher CreatePoint/zh-cn: Difference between revisions

From FreeCAD Documentation
(Created page with "* 点击{{KEY|24px Create point}}按钮来激活此功能。 * 通过在草图中单击来创建一个点。 * 按{{KEY|Esc}}键或点击鼠...")
(Created page with "不能在草图的范围之外创建点。如需在3D视图中创建点,请以零件工作台中的点工具(PartDesign Point)创建基准点,或...")
Line 23: Line 23:
==限制==
==限制==


不能在草图的范围之外创建点。如需在3D视图中创建点,请以[[PartDesign_Point|零件工作台中的点工具(PartDesign Point)]]创建基准点,或用[[Part_Point|零件工作台中的点工具(Part Point)]]加以取代。
The created point is not available outside of the sketch. In case a point is needed in the 3D-view, use the [[PartDesign_Point|PartDesign Point]] for a datum point or the [[Part_Point|Part Point]] instead.





Revision as of 10:02, 11 July 2019

Sketcher CreatePoint

Menu location
Sketch → Sketcher geometries → Create point
Workbenches
Sketcher
Default shortcut
None
Introduced in version
-
See also
None

描述

通过此点工具可在当前的草图中创建一个点,而所创建的点可作为构造几何图形的元素。创建的点将一直作为构造要素,且不会在3D视图中显示出来。

Point in the sketcher

如何使用

  • 点击 Create point按钮来激活此功能。
  • 通过在草图中单击来创建一个点。
  • Esc键或点击鼠标右键来关闭此功能。

选项

A mode to snap to the grid can be set in the Sketcher Preferences. The point snaps then to the grid, if it has less than 25% grid distance to a grid line. The snap mode does not fix them to the grid. The points can be moved with the mouse or constraints to other locations.

限制

不能在草图的范围之外创建点。如需在3D视图中创建点,请以零件工作台中的点工具(PartDesign Point)创建基准点,或用零件工作台中的点工具(Part Point)加以取代。