Sketcher CreateLine/pt-br: Difference between revisions

From FreeCAD Documentation
(Updating to match new version of source page)
(Updating to match new version of source page)
 
(2 intermediate revisions by the same user not shown)
Line 2: Line 2:


{{Docnav
{{Docnav
|[[Sketcher_CreatePolyline|Polyline]]
|[[Sketcher_CreatePoint|Point]]
|[[Sketcher_CreateArc|Arc]]
|[[Sketcher_CreateArc|Arc by center]]
|[[Sketcher_Workbench|Sketcher]]
|[[Sketcher_Workbench|Sketcher]]
|IconL=Sketcher_CreatePoint.svg
|IconL=Sketcher_CreatePolyline.svg
|IconR=Sketcher_CreateArc.svg
|IconR=Sketcher_CreateArc.svg
|IconC=Workbench_Sketcher.svg
|IconC=Workbench_Sketcher.svg
Line 16: Line 16:
==Description==
==Description==


The [[Image:Sketcher_CreateLine.svg|24px]] [[Sketcher_CreateLine|Sketcher CreateLine]] tool creates a line. {{Version|0.22}}: If [[Sketcher_Preferences#General|On-View-Parameters]] are enabled the tool has three modes.
The [[Image:Sketcher_CreateLine.svg|24px]] [[Sketcher_CreateLine|Sketcher CreateLine]] tool creates a line. {{Version|1.0}}: If [[Sketcher_Preferences#General|On-View-Parameters]] are enabled the tool has three modes.


[[Image:Sketcher_LineExample1.png‎]]
[[Image:Sketcher_LineExample1.png‎]]
Line 24: Line 24:
See also: [[Sketcher_Workbench#Drawing_aids|Drawing aids]].
See also: [[Sketcher_Workbench#Drawing_aids|Drawing aids]].


Pos-OVP = Positional [[Sketcher_Preferences#General|On-View-Parameters]]. {{Version|0.22}}<br>
Pos-OVP = Positional [[Sketcher_Preferences#General|On-View-Parameters]]. {{Version|1.0}}<br>
Dim-OVP = Dimensional On-View-Parameters. {{Version|0.22}}
Dim-OVP = Dimensional On-View-Parameters. {{Version|1.0}}


# There are several ways to invoke the tool:
# There are several ways to invoke the tool:
Line 31: Line 31:
#* Select the {{MenuCommand|Sketcher → Sketcher geometries → [[Image:Sketcher_CreateLine.svg|16px]] Create line}} option from the menu.
#* Select the {{MenuCommand|Sketcher → Sketcher geometries → [[Image:Sketcher_CreateLine.svg|16px]] Create line}} option from the menu.
#* Use the keyboard shortcut: {{KEY|G}} then {{KEY|L}}.
#* Use the keyboard shortcut: {{KEY|G}} then {{KEY|L}}.
# The cursor changes to a white cross with the current tool mode icon.
# The cursor changes to a cross with the current tool mode icon.
# If [[Sketcher_Preferences#General|On-View-Parameters]] are enabled the '''Line parameters''' section ({{Version|0.22}}) is added at the top of the [[Sketcher_Dialog|Sketcher Dialog]].
# If [[Sketcher_Preferences#General|On-View-Parameters]] are enabled the '''Line parameters''' section ({{Version|1.0}}) is added at the top of the [[Sketcher_Dialog|Sketcher Dialog]].
# Optionally press the {{KEY|M}} key or select from the dropdown list in the parameters section to change the tool mode:
# Optionally press the {{KEY|M}} key or select from the dropdown list in the parameters section to change the tool mode:
#* [[Image:Sketcher_CreateLineAngleLength.svg|16px]] '''Point, length, angle''': {{Version|0.22}}
#* [[Image:Sketcher_CreateLineAngleLength.svg|16px]] '''Point, length, angle''': {{Version|1.0}}
#*# Pick the start point of the line. Or with Pos-OVP: enter its X and/or Y coordinate.
#*# Pick the start point of the line. Or with Pos-OVP: enter its X and/or Y coordinate.
#*# Pick the endpoint of the line. Or with Dim-OVP: enter the length and/or angle of the line. The angle is relative to the X axis of the sketch.
#*# Pick the endpoint of the line. Or with Dim-OVP: enter the length and/or angle of the line. The angle is relative to the X axis of the sketch.
#* [[Image:Sketcher_CreateLineLengthWidth.svg|16px]] '''Point, width, height''': {{Version|0.22}}
#* [[Image:Sketcher_CreateLineLengthWidth.svg|16px]] '''Point, width, height''': {{Version|1.0}}
#*# Pick the start point of the line. Or with Pos-OVP: enter its X and/or Y coordinate.
#*# Pick the start point of the line. Or with Pos-OVP: enter its X and/or Y coordinate.
#*# Pick the endpoint of the line. Or with Dim-OVP: enter its X and/or Y distance from the start point.
#*# Pick the endpoint of the line. Or with Dim-OVP: enter its X and/or Y distance from the start point.
Line 50: Line 50:


{{Docnav
{{Docnav
|[[Sketcher_CreatePolyline|Polyline]]
|[[Sketcher_CreatePoint|Point]]
|[[Sketcher_CreateArc|Arc]]
|[[Sketcher_CreateArc|Arc by center]]
|[[Sketcher_Workbench|Sketcher]]
|[[Sketcher_Workbench|Sketcher]]
|IconL=Sketcher_CreatePoint.svg
|IconL=Sketcher_CreatePolyline.svg
|IconR=Sketcher_CreateArc.svg
|IconR=Sketcher_CreateArc.svg
|IconC=Workbench_Sketcher.svg
|IconC=Workbench_Sketcher.svg

Latest revision as of 11:01, 23 April 2024

Sketcher Line

Veja também
Sketch → Sketcher geometries → Create line
Bancadas de trabalho
Sketcher
Atalho padrão
L
Introduzido na versão
-
Veja também
Sketcher Polyline

Description

The Sketcher CreateLine tool creates a line. introduced in version 1.0: If On-View-Parameters are enabled the tool has three modes.

Usage

See also: Drawing aids.

Pos-OVP = Positional On-View-Parameters. introduced in version 1.0
Dim-OVP = Dimensional On-View-Parameters. introduced in version 1.0

  1. There are several ways to invoke the tool:
    • Press the Create line button.
    • Select the Sketcher → Sketcher geometries → Create line option from the menu.
    • Use the keyboard shortcut: G then L.
  2. The cursor changes to a cross with the current tool mode icon.
  3. If On-View-Parameters are enabled the Line parameters section (introduced in version 1.0) is added at the top of the Sketcher Dialog.
  4. Optionally press the M key or select from the dropdown list in the parameters section to change the tool mode:
    • Point, length, angle: introduced in version 1.0
      1. Pick the start point of the line. Or with Pos-OVP: enter its X and/or Y coordinate.
      2. Pick the endpoint of the line. Or with Dim-OVP: enter the length and/or angle of the line. The angle is relative to the X axis of the sketch.
    • Point, width, height: introduced in version 1.0
      1. Pick the start point of the line. Or with Pos-OVP: enter its X and/or Y coordinate.
      2. Pick the endpoint of the line. Or with Dim-OVP: enter its X and/or Y distance from the start point.
    • 2 points:
      1. Pick the start point of the line. Or with Pos-OVP: enter its X and/or Y coordinate.
      2. Pick the endpoint of the line. Or with Pos-OVP: enter its X and/or Y coordinate.
  5. The line is created and applicable Pos-OVP and Dim-OVP based constraints are added.
  6. If the tool runs in continue mode:
    1. Optionally keep creating lines.
    2. To finish, right-click or press Esc, or start another geometry or constraint creation tool.