Reinforcement BentShapeRebar/ru: Difference between revisions

From FreeCAD Documentation
(Created page with "{{Userdocnavi/ru}}")
(Updating to match new version of source page)
Line 8: Line 8:
|MenuLocation=Arch → Rebar tools
|MenuLocation=Arch → Rebar tools
|Workbenches=[[Arch Workbench|Arch]], [[BIM Workbench|BIM]]
|Workbenches=[[Arch Workbench|Arch]], [[BIM Workbench|BIM]]
|SeeAlso=[[Arch_Rebar_Stirrup|Stirrup Rebar]], [[Arch Rebar]]
|SeeAlso=[[Arch_Rebar_Stirrup|Stirrup Rebar]], [[Arch Rebar|Arch Rebar]]
|Version=0.17
|Version=0.17
}}
}}
Line 18: Line 18:
</div>
</div>


This command is part of the [[Reinforcement Addon]], that you can install with the [[Addon Manager]], via the menu {{MenuCommand|Tools → Addon manager → Reinforcement}}.
This command is part of the [[Reinforcement Addon|Reinforcement Addon]], that you can install with the [[Addon Manager|Addon Manager]], via the menu {{MenuCommand|Tools → Addon manager → Reinforcement}}.


[[Image:Arch_Rebar_BentShape_example.png|400px]]
[[Image:Arch_Rebar_BentShape_example.png|400px]]
Line 27: Line 27:
==Использование==
==Использование==


# Select any face of a previously created {{Button|[[Image:Arch_Structure.svg|16px]] [[Arch Structure]]}} object.
# Select any face of a previously created {{Button|[[Image:Arch_Structure.svg|16px]] [[Arch Structure|Arch Structure]]}} object.
# Then select {{Button|[[Image:Arch_Rebar_BentShape.svg|16px]] [[Arch Rebar BentShape|BentShape Rebar]]}} from the rebar tools.
# Then select {{Button|[[Image:Arch_Rebar_BentShape.svg|16px]] [[Arch Rebar BentShape|BentShape Rebar]]}} from the rebar tools.
# A task panel will pop-out on the left side of the screen as shown below.
# A task panel will pop-out on the left side of the screen as shown below.
Line 67: Line 67:
}}
}}


* Creates a {{incode|Rebar}} object from the given {{incode|structure}}, which is an [[Arch Structure]], and {{incode|facename}}, which is a face of that structure.
* Creates a {{incode|Rebar}} object from the given {{incode|structure}}, which is an [[Arch Structure|Arch Structure]], and {{incode|facename}}, which is a face of that structure.
** If no {{incode|structure}} nor {{incode|facename}} are given, it will take the user selected face as input.
** If no {{incode|structure}} nor {{incode|facename}} are given, it will take the user selected face as input.
* {{incode|f_cover}}, {{incode|b_cover}}, {{incode|l_cover}}, {{incode|r_cover}}, and {{incode|t_cover}} are inner offset distances for the rebar elements with respect to the faces of the structure. They are respectively the front, bottom, left, right, and top offsets.
* {{incode|f_cover}}, {{incode|b_cover}}, {{incode|l_cover}}, {{incode|r_cover}}, and {{incode|t_cover}} are inner offset distances for the rebar elements with respect to the faces of the structure. They are respectively the front, bottom, left, right, and top offsets.
Line 97: Line 97:


You can change the properties of the rebar with the following function
You can change the properties of the rebar with the following function

{{Code|code=
{{Code|code=
editBentShapeRebar(Rebar, f_cover, b_cover, l_cover, r_cover,
editBentShapeRebar(Rebar, f_cover, b_cover, l_cover, r_cover,
Line 116: Line 117:
12, 35, 100, 155, 2, True, 6, "Top")
12, 35, 100, 155, 2, True, 6, "Top")
}}
}}

<div class="mw-translate-fuzzy">
<div class="mw-translate-fuzzy">
[[Category:Arch/ru]]
[[Category:Arch/ru]]

Revision as of 16:31, 3 February 2020

Arch Rebar BentShape

Menu location
Arch → Rebar tools
Workbenches
Arch
Default shortcut
None
See also
Stirrup
 
This command is part of the Reinforcement AddOn, that you can install via menu Tools → Addons Manager

Arch Rebar BentShape

Menu location
Arch → Rebar tools
Workbenches
Arch, BIM
Default shortcut
None
Introduced in version
0.17
See also
Stirrup Rebar, Arch Rebar

Описание

Инструмент Bent Shape Rebar позволяет пользователю создавать в структурном элементе арматурный стержень с изогнутой формой.

This command is part of the Reinforcement Addon, that you can install with the Addon Manager, via the menu Tools → Addon manager → Reinforcement.

Использование

  1. Select any face of a previously created Arch Structure object.
  2. Then select BentShape Rebar from the rebar tools.
  3. A task panel will pop-out on the left side of the screen as shown below.
  4. Select the desired orientation.
  5. Give the inputs like front cover, left cover, right cover, bottom cover, top cover, anchor length, bent angle, rounding and diameter of the rebar.
  6. Select the mode of distribution either amount or spacing.
  7. If spacing is selected, a user can also opt for custom spacing.
  8. Pick selected face is used to verify or change the face for rebar distribution.
  9. Click OK or Apply to generate the rebars.
  10. Click Cancel to exit the task panel.

Taskview panel for the Arch Rebar BentShape tool

Свойства

  • ДанныеOrientation: It decides the orientation of the rebar (like a bottom, top, right and left).
  • ДанныеFront Cover: The distance between rebar and selected face.
  • ДанныеLeft Cover: The distance between the left end of the rebar to the left face of the structure.
  • ДанныеRight Cover: The distance between the right end of the rebar to right face of the structure.
  • ДанныеBottom Cover: The distance between rebar from the bottom face of the structure.
  • ДанныеTop Cover: The distance between rebar from the top face of the structure.
  • ДанныеAnchor Length: It is the arm's length of bent shape rebar.
  • ДанныеBent Angle: It decides angle in bent shape rebar.
  • ДанныеAmount: The amount of rebars.
  • ДанныеSpacing: The distance between the axes of each bar.

Скриптование

Инструмент Bent Shape Rebar можно использовать в macros и на консоли python с помощью следующей функции:

Rebar = makeBentShapeRebar(f_cover, b_cover, l_cover, r_cover,
                           diameter, t_cover, bentLength, bentAngle, rounding, amount_spacing_check, amount_spacing_value, orientation="Bottom",
                           structure=None, facename=None)
  • Creates a Rebar object from the given structure, which is an Arch Structure, and facename, which is a face of that structure.
    • If no structure nor facename are given, it will take the user selected face as input.
  • f_cover, b_cover, l_cover, r_cover, and t_cover are inner offset distances for the rebar elements with respect to the faces of the structure. They are respectively the front, bottom, left, right, and top offsets.
  • diameter is the diameter of the reinforcement bars inside the structure.
  • rounding is the parameter that determines the bending radius of the center reinforcement bars.
  • bentLength and bentAngle define the length of the tip of the reinforcement bars, and the bending angle from the center bars.
  • amount_spacing_check if it is True it will create as many reinforcement bars as given by amount_spacing_value; if it is False it will create reinforcement bars separated by the numerical value of amount_spacing_value.
  • amount_spacing_value specifies the number of reinforcement bars, or the value of the separation between them, depending on amount_spacing_check.
  • orientation specifies the orientation of the rebar; it can be "Bottom", "Top", "Left", or "Right".

Example

import FreeCAD, Arch, BentShapeRebar

Structure = Arch.makeStructure(length=1000, width=1000, height=100)
Structure.ViewObject.Transparency = 80
FreeCAD.ActiveDocument.recompute()

Rebar = BentShapeRebar.makeBentShapeRebar(50, 20, 20, 20,
                                          8, 40, 100, 135, 2, True, 4, "Bottom", Structure, "Face4")
Rebar.ViewObject.ShapeColor = (0.9, 0.0, 0.0)

Rebar2 = BentShapeRebar.makeBentShapeRebar(50, 40, 20, 20,
                                           8, 20, 100, 135, 2, True, 4, "Bottom", Structure, "Face6")
Rebar2.ViewObject.ShapeColor = (0.0, 0.0, 0.9)

Edition of the rebar

You can change the properties of the rebar with the following function

editBentShapeRebar(Rebar, f_cover, b_cover, l_cover, r_cover,
                   diameter, t_cover, bentLength, bentAngle, rounding, amount_spacing_check, amount_spacing_value, orientation,
                   structure=None, facename=None)
  • Rebar is a previously created BentShapeRebar object.
  • The other parameters are the same as required by the makeBentShapeRebar() function.
  • structure and facename may be omitted so that the rebar stays in the original structure.
import BentShapeRebar

BentShapeRebar.editBentShapeRebar(Rebar, 50, 20, 20, 20,
                                  12, 20, 100, 155, 2, True, 6, "Top")

BentShapeRebar.editBentShapeRebar(Rebar2, 50, 35, 20, 20,
                                  12, 35, 100, 155, 2, True, 6, "Top")