Part Spiral/it: Difference between revisions

From FreeCAD Documentation
(Created page with "=== Dati ===")
(Created page with "L'oggetto ha le stesse proprietà di collegamento di un Part Part2DObject.")
Line 49: Line 49:
{{TitleProperty|Attachment}}
{{TitleProperty|Attachment}}


The object has the same attachment properties as a [[Part_Part2DObject#Data|Part Part2DObject]].
L'oggetto ha le stesse proprietà di collegamento di un [[Part_Part2DObject/it#Dati|Part Part2DObject]].


{{TitleProperty|Spiral}}
{{TitleProperty|Spiral}}

Revision as of 22:18, 2 January 2024

Part Spirale

Posizione nel menu
Parte → Crea primitive → Spirale
Ambiente
Part, OpenSCAD
Avvio veloce
Nessuno
Introdotto nella versione
0.14
Vedere anche
Part Primitive

Descrizione

Una Part Spirale è una forma parametrica che può essere creata con il comando Part Primitive . Nel sistema di coordinate definito dalla sua proprietà DatiPlacement, la spirale giace sul piano XY con il centro nell'origine e il punto iniziale sull'asse X. Si allarga girando in senso antiorario.

Utilizzo

Vedere Part Primitive.

Esempio

Part Spirale dall'esempio di scripting

Qui viene mostrato un oggetto Part Spirale creato con l'esempio di scripting riportato di seguito.

Proprietà

Vedere anche: Editor delle proprietà.

Un oggetto Part Spirale deriva da un oggetto Funzione Part e ne eredita tutte le proprietà. Ha inoltre le seguenti proprietà aggiuntive:

Dati

Attachment

L'oggetto ha le stesse proprietà di collegamento di un Part Part2DObject.

Spiral

  • DatiGrowth (Length): The distance between two consecutive turns of the spiral. The default is 1mm.
  • DatiRadius (Length): The start radius of the spiral, the distance between its center and its start point. Can be 0mm. The default is 1mm.
  • DatiRotations (QuantityConstraint): The number of rotations, or turns, of the spiral. The default is 2.
  • DatiSegment Length (QuantityConstraint): The number of turns per spiral subdivision. The default is 1, meaning each full turn of the spiral is a separate segment. Use 0 to suppress subdivision.

Scripting

See also: Autogenerated API documentation, Part scripting and FreeCAD Scripting Basics.

A Part Spiral can be created with the addObject() method of the document:

spiral = FreeCAD.ActiveDocument.addObject("Part::Spiral", "mySpiral")
  • Where "mySpiral" is the name for the object.
  • The function returns the newly created object.

Example:

import FreeCAD as App

doc = App.activeDocument()

spiral = doc.addObject("Part::Spiral", "mySpiral")
spiral.Growth = 2
spiral.Radius = 3
spiral.Rotations = 4
spiral.Placement = App.Placement(App.Vector(1, 2, 3), App.Rotation(75, 60, 30))

doc.recompute()