Part SliceApart/it: Difference between revisions
Renatorivo (talk | contribs) (Created page with "{{Userdocnavi/it}}") |
Renatorivo (talk | contribs) No edit summary |
||
Line 3: | Line 3: | ||
{{GuiCommand/it|Name=Part SliceApart |
{{GuiCommand/it|Name=Part SliceApart |
||
|Name/it=Affetta |
|Name/it=Affetta in parti |
||
|MenuLocation=Part → Dividi → Affetta |
|MenuLocation=Part → Dividi → Affetta in parti |
||
|Version=0.18.15506 |
|Version=0.18.15506 |
||
|Workbenches=[[Part Module/it|Part]]|SeeAlso=[[Part Slice/it|Affetta]], [[Part_ExplodeCompound/it|Esplodi il composto]] |
|Workbenches=[[Part Module/it|Part]]|SeeAlso=[[Part Slice/it|Affetta in composto]], [[Part_ExplodeCompound/it|Esplodi il composto]] |
||
}} |
}} |
||
Revision as of 08:57, 10 May 2019
Affetta in parti |
Posizione nel menu |
---|
Part → Dividi → Affetta in parti |
Ambiente |
Part |
Avvio veloce |
Nessuno |
Introdotto nella versione |
0.18.15506 |
Vedere anche |
Affetta in composto, Esplodi il composto |
Descrizione
Strumento per dividere le forme per intersezione con altre forme. Ad esempio, per un cubo e un piano, vengono creati due solidi.
Nella figura sopra, i pezzi sono stati separati manualmente dopo l'operazione, per rendere visibili le singole parti.
Affetta una parte è uguale a Affetta seguito da Esplodi il composto. Mentre "Slice to compound" è completamente parametrico e non crea problemi mentre il numero di pezzi cambia, "Affetta una parte" non aggiorna il numero di oggetti quando il numero di pezzi cambia. Entrambi creano la funzione parametrica Slice, che mette i pezzi tagliati in un composto, ma "Affetta una parte" esplode il composto risultante in oggetti separati.
Le forme di uscita occupano lo stesso spazio dell'originale. Ma sono divise dove si intersecano con altre forme. I pezzi divisi sono pezzi individuali.
Per ulteriori informazioni, visitare la pagina Affetta.
Struttura ad albero di Affetta una parte
Il comando Affetta una parte crea più di un solo oggetto affettato. Nell'esempio seguente un cubo viene affettato da una faccia.
The slice is created and for each piece of it there is a Part CompoundFilter created, thus the same slice occurs multiple times below each CompundFilter. All these CompoundFilters are united in a Compound.
Example: making puzzle
See Part Slice Example Steps 1 to 6
Scripting
The tool can by used in macros and from the python console by using the following function:
BOPTools.SplitFeatures.makeSlice(name)
Set mode to split for slice apart
- Creates an empty Slice feature. The 'Base' and 'Tools' properties must be assigned explicitly, afterwards.
- Returns the newly created object.
Slice can also be applied to plain shapes, without the need to have a document object, via:
BOPTools.SplitAPI.slice(base_shape, tool_shapes, mode, tolerance = 0.0)
This can be useful for making custom Python scripted features.
Example:
import BOPTools.SplitFeatures
j = BOPTools.SplitFeatures.makeSlice(name= 'Slice')
j.Base = FreeCADGui.Selection.getSelection()[0]
j.Tools = FreeCADGui.Selection.getSelection()[1:]
The tool itself is implemented in Python, see /Mod/Part/BOPTools/SplitFeatures.py under where FreeCAD is installed.
Version
Slice Apart was introduced in FreeCAD v0.18.15506. FreeCAD needs to be compiled with OCC 6.9.0 or later; otherwise, the tool is unavailable.
- Primitives: Box, Cylinder, Sphere, Cone, Torus, Tube, Create primitives, Shape builder
- Creation and modification: Extrude, Revolve, Mirror, Fillet, Chamfer, Make face from wires, Ruled Surface, Loft, Sweep, Section, Cross sections, 3D Offset, 2D Offset, Thickness, Projection on surface, Attachment
- Boolean: Make compound, Explode Compound, Compound Filter, Boolean, Cut, Fuse, Common, Connect, Embed, Cutout, Boolean fragments, Slice apart, Slice, XOR
- Measure: Measure Linear, Measure Angular, Measure Refresh, Clear All, Toggle All, Toggle 3D, Toggle Delta
- Getting started
- Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
- Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate
- Help: Tutorials, Video tutorials
- Workbenches: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Start, Surface, TechDraw, Test Framework, Web
- Hubs: User hub, Power users hub, Developer hub