Part Loft/ro: Difference between revisions

From FreeCAD Documentation
(Created page with "Instrumentul Loft are trei parametrii, "Ruled","Solid" and "Closed" fiecare având câte o valoare sau "true" ori "false".")
(Updating to match new version of source page)
 
(37 intermediate revisions by 3 users not shown)
Line 1: Line 1:
<languages/>
<languages/>
{{GuiCommand/ro|Name=Part Loft|Name/ro=Part Loft|MenuLocation=Part → Loft...||Workbenches=[[Part Module/ro|Part]]|SeeAlso=[[Part Sweep/ro|Part Sweep]]}}


{{Docnav
== == Prezentare generală
|[[Part_RuledSurface|RuledSurface]]
Instrumentul Loftdin Atelierul (Part Workbench) este utilizat pentru a crea o fațetă, o cochilie sau o formă solidă din două sau mai multe profiluri. Profilele pot fi un punct (vertex), o linie (margine), o polilinie sau o fațetă. Muchiile și poliliniile pot fi deschise sau închise. Există mai multe limitări și complicații [[Part_Loft#limitations and complications|limitations and complications]] , vezi mai jos, însă profilurile pot proveni de la primitivele geometrice din Atelierul Part/Piese, de la funcționalitățile Aelierului Draft Workbench și de la Atelierul Sketch.
|[[Part_Sweep|Sweep]]
|[[Part_Workbench|Part]]
|IconL=Part_RuledSurface.svg
|IconR=Part_Sweep.svg
|IconC=Workbench_Part.svg
}}


<div class="mw-translate-fuzzy">
Instrumentul Loft are trei parametrii, "Ruled","Solid" and "Closed" fiecare având câte o valoare sau "true" ori "false".
{{GuiCommand/ro
|Name=Part Loft
|Name/ro=Part Loft
|MenuLocation=Part → Loft...
|
|Workbenches=[[Part_Workbench/ro|Part]]
|SeeAlso=[[Part Sweep/ro|Part Sweep]]
}}
</div>


==Description==
If "Ruled" is "true" FreeCAD creates a face, faces or a solid from ruled surfaces. [http://en.wikipedia.org/wiki/Ruled_surface Ruled surface page on Wikipedia.]


The [[Image:Part_Loft.svg|24px]] [[Part_Loft|Part Loft]] command creates a face, a shell, or a solid shape from two or more profiles (cross-sections).
If "Solid" is "true" FreeCAD creates a solid if the profiles are of closed geometry, if "false" FreeCAD creates a face or (if more than one face) a shell for either open or closed profiles.


[[File:Part_Loft_solid_ruled_from3profiles_example_FreeCAD_0_13.jpg|400px]]
If "Closed" is "true" FreeCAD attempts to loft the last profile to the first profile to create a closed figure.
{{Caption|Loft from three profiles which are two [[Part_Circle|Part Circles]] and one [[Part_Ellipse|Part Ellipse]]. Parameters are Solid "True" and Ruled "True".}}


==Usage==
For more info on how the profiles are joined together, refer [[Part Loft Technical Details|Part Loft Technical Details]] page.


# There are several ways to invoke the command:
[[File:Part_Loft_solid_ruled_from3profiles_example_FreeCAD_0_13.jpg|frame|centre|Part_Loft. From three profiles which are two Part_Circles and one Part_Ellipse. Parameters are Solid "True" and Ruled "True"]]
#* Press the {{Button|[[Image:Part_Loft.svg|16px]] [[Part_Loft|Loft...]]}} button.
#* Select the {{MenuCommand|Part → [[Image:Part_Loft.svg|16px]] Loft...}} option from the menu.
# The Loft [[Task_panel|task panel]] opens.
# In the ''Available Profiles'' list on the left select the first profile and click on the right arrow to place it in the ''Selected profiles'' list on the right.
# Repeat for the second profile and again if more than two profiles are desired.
# Optionally use the up and down arrows to reorder the selected profiles.
# Define options [[#Data|Create solid]], [[#Data|Ruled surface]], and [[#Data|Closed]].
# Click {{Button|OK}}.


===Accepted geometry===
==Limitations and complications==
*A vertex or point
** vertex or point may only be used as the first and/or last profile in the list of profiles.
***For example
****you cannot loft from a circle to a point, to an ellipse.
****However you could Loft from a point to a circle to an ellipse to another point.
*Open or closed geometry profiles can not be mixed in one single Loft
**In one Loft, all profiles (lines wires etc.) must be either open or closed.
***For example
****FreeCAD can not Loft between one Part Circle and one default Part Line.
*Draft Workbench features
**Draft Workbench features can be directly used as a profile in FreeCAD 0.14 or later.
***For example the following Draft features can be used as profiles in a Part Loft
****Draft Polygon.
****Draft Point, Line, wire,
****Draft B-spline, Bezier Curve
****Draft Circle, Ellipse, Rectangle
*PartDesign Sketches
**The profile may be created with a sketch. However only a valid sketch will be shown in the list to be available for selection.
**The sketch must contain only one open or closed wire or line (can be multiple lines, if those lines are all connected as they are then a single wire)
*Part Workbench
**the profile can be a valid Part geometric primitive which can be created with the [[Part_CreatePrimitives|Part CreatePrimitives]] tool
***For example the following Part geometric primitives can be a valid profile
****Point (Vertex), Line (Edge)
****Helix, Spiral
****Circle, Ellipse
****Regular Polygon
****Plane (Face)


<div class="mw-translate-fuzzy">
*Closed Lofts
==Prezentare generală==
** The results of closed lofts may be unexpected - the loft may develop twists or kinks. Lofting is very sensitive to the Placement of the profiles and the complexity of the curves required to connect the corresponding Vertices in all the profiles.
Instrumentul Loft din Atelierul (Part Workbench) este utilizat pentru a crea o fațetă, o cochilie sau o formă solidă (corp) plecând de la două sau mai multe profiluri. Profilele pot fi un punct (vertex), o linie (margine), o polilinie sau o fațetă. Muchiile și poliliniile pot fi deschise sau închise. Există mai multe limitări și complicații [[Part_Loft#limitations and complications|limitations and complications]] , vezi mai jos, însă profilurile pot proveni de la primitivele geometrice din Atelierul Part/Piese, de la funcționalitățile Aelierului Draft Workbench și de la Atelierul Sketch.
</div>


* [[App_Link|App Link]] objects linked to the appropriate object types and [[App_Part|App Part]] containers with the appropriate visible objects inside can also be used as profiles. {{Version|0.20}}
==An example Loft==
The Loft tool is in the Part Workbench, menu Part -> Loft... or via the icon in the tool bar.


==Options==
[[Image:Part_Loft_Ikon_Ballon_Hilfe.png]]


====Create solid====
In the "Tasks" will be two lists: "node / wire" and "free form".


<div class="mw-translate-fuzzy">
[[Image:Part_Loft_Liste3.png]]
Dacă "Solid" are valoarea "true" FreeCAD creează un solid dacă profilele sunt forme geometrice închise, dacă valorea este "false" FreeCAD creează o fațetă sau (dacă are mi mult de o fațetă) o cochilie dacă este un profil închis sau deschis.
</div>


===Selection of the elements===
====Ruled surface====
In the "node / wire" the available items are displayed. Two elements must be selected one after the first in this list.


<div class="mw-translate-fuzzy">
[[Image:Part_Loft_Liste_Auswahl_3b.png]]
Dacă este true" , "Ruled" FreeCAD creează o fațetă, fațetele sau solidele din suprafețele riglate. [http://en.wikipedia.org/wiki/Ruled_surface Ruled surface page on Wikipedia.]
</div>


====Closed====


<div class="mw-translate-fuzzy">
Thereafter, with the blue arrow that item is added to the list of "free form".
FreeCAD încearcă să atașeze ultimul profil la primul profil pentru a crea o figură închisă.
</div>


<div class="mw-translate-fuzzy">
[[Image:Part_Loft_Liste_Auswahl_3c.png]]
Pentru mai multe informații supra modului cum profilele sunt legate împreună , referiți-vă la pagina [[Part Loft Technical Details|Part Loft Technical Details]] .
</div>


==Properties==
The selected items must be of the same type.


See also: [[Property_editor|Property editor]].
Tip: the active / selected items in the list are displayed in the 3D area as active / selected.


A Part Loft object is derived from a [[Part_Feature|Part Feature]] object and inherits all its properties. It also has the following additional properties:
===Command complete===
If both elements are selected, the command can be completed with "OK".


===Data===
[[Image:Part_Loft_Liste_Auswahl_3d.png]]


{{TitleProperty|Loft}}
==Result==
From closed lines we get surfaces which might be taken as a superficial look for solids.


* {{PropertyData|Sections|LinkList}}: lists the sections used.
[[Image:Part_Loft_geschlossen.png]]
* {{PropertyData|Solid|Bool}}: true or false (default). True creates a solid.
* {{PropertyData|Ruled|Bool}}: true or false (default). True creates a ruled surface.
* {{PropertyData|Closed|Bool}}: rue or false (default). True creates a closed loft by connecting last to first profile.
* {{PropertyData|Max Degree|IntegerConstraint}}: Maximum degree.


==Limitations==
If indeed a solid needs to be created, used the button "Create Solid" or after creating the Loft switch to its '' properties'' tab'' data'' and set the switch "Solid" to true.


A Part Loft has the same limitations as a [[Part_Sweep#Limitations|Part Sweep]].
The procedure is the same as described above with open polylines.

==FreeCAD Version==
*added Version 0.13
*"closed" property added Version 0.14
*Ability to use a face as a profile added Version 0.14


=== Closed Lofts ===


<div class="mw-translate-fuzzy">
*Closed Lofts
** Rezultatele loft-urilor închise pot fi neașteptate - mansarda/loft ul poate dezvolta răsuciri sau deformări. Lofting-ul este foarte sensibil la Plasamentul profilurilor și la complexitatea curbelor necesare pentru conectarea Vârfurilor corespunzătoare în toate profilurile.
</div>




{{Docnav
|[[Part_RuledSurface|RuledSurface]]
|[[Part_Sweep|Sweep]]
|[[Part_Workbench|Part]]
|IconL=Part_RuledSurface.svg
|IconR=Part_Sweep.svg
|IconC=Workbench_Part.svg
}}


{{Part Tools navi{{#translation:}}}}
{{clear}}
{{Userdocnavi{{#translation:}}}}

Latest revision as of 18:02, 4 October 2023

Part Loft

poziția meniului
Part → Loft...
Ateliere
Part
scurtătură
nici unul
Prezentat în versiune
-
A se vedea, de asemenea,
Part Sweep

Description

The Part Loft command creates a face, a shell, or a solid shape from two or more profiles (cross-sections).

Loft from three profiles which are two Part Circles and one Part Ellipse. Parameters are Solid "True" and Ruled "True".

Usage

  1. There are several ways to invoke the command:
    • Press the Loft... button.
    • Select the Part → Loft... option from the menu.
  2. The Loft task panel opens.
  3. In the Available Profiles list on the left select the first profile and click on the right arrow to place it in the Selected profiles list on the right.
  4. Repeat for the second profile and again if more than two profiles are desired.
  5. Optionally use the up and down arrows to reorder the selected profiles.
  6. Define options Create solid, Ruled surface, and Closed.
  7. Click OK.

Accepted geometry

Prezentare generală

Instrumentul Loft din Atelierul (Part Workbench) este utilizat pentru a crea o fațetă, o cochilie sau o formă solidă (corp) plecând de la două sau mai multe profiluri. Profilele pot fi un punct (vertex), o linie (margine), o polilinie sau o fațetă. Muchiile și poliliniile pot fi deschise sau închise. Există mai multe limitări și complicații limitations and complications , vezi mai jos, însă profilurile pot proveni de la primitivele geometrice din Atelierul Part/Piese, de la funcționalitățile Aelierului Draft Workbench și de la Atelierul Sketch.

Options

Create solid

Dacă "Solid" are valoarea "true" FreeCAD creează un solid dacă profilele sunt forme geometrice închise, dacă valorea este "false" FreeCAD creează o fațetă sau (dacă are mi mult de o fațetă) o cochilie dacă este un profil închis sau deschis.

Ruled surface

Dacă este true" , "Ruled" FreeCAD creează o fațetă, fațetele sau solidele din suprafețele riglate. Ruled surface page on Wikipedia.

Closed

FreeCAD încearcă să atașeze ultimul profil la primul profil pentru a crea o figură închisă.

Pentru mai multe informații supra modului cum profilele sunt legate împreună , referiți-vă la pagina Part Loft Technical Details .

Properties

See also: Property editor.

A Part Loft object is derived from a Part Feature object and inherits all its properties. It also has the following additional properties:

Data

Loft

  • DateSections (LinkList): lists the sections used.
  • DateSolid (Bool): true or false (default). True creates a solid.
  • DateRuled (Bool): true or false (default). True creates a ruled surface.
  • DateClosed (Bool): rue or false (default). True creates a closed loft by connecting last to first profile.
  • DateMax Degree (IntegerConstraint): Maximum degree.

Limitations

A Part Loft has the same limitations as a Part Sweep.

Closed Lofts

  • Closed Lofts
    • Rezultatele loft-urilor închise pot fi neașteptate - mansarda/loft ul poate dezvolta răsuciri sau deformări. Lofting-ul este foarte sensibil la Plasamentul profilurilor și la complexitatea curbelor necesare pentru conectarea Vârfurilor corespunzătoare în toate profilurile.