PartDesign SubtractiveTorus/ru: Difference between revisions

From FreeCAD Documentation
No edit summary
(Created page with "Параметры Тора после его создания можно изменить двумя способами: * Дважды щелкнув по нему в дер...")
Line 35: Line 35:
==Опции==
==Опции==


Параметры Тора после его создания можно изменить двумя способами:
The Torus can be edited after its creation in two ways:
* Дважды щелкнув по нему в дереве модели или щелкнув правой кнопкой мыши и выбрав '''Редактировать примитив''' в контекстном меню; это откроет окно параметров примитива.
* Double-clicking it in the Model tree, or by right-clicking and selecting '''Edit primitive''' in the contextual menu; this brings up the Primitive parameters.
* Via the [[Property_editor|Property editor]].
* Через [[Property_editor/ru|Редактор свойств]].


==Свойства==
==Свойства==

Revision as of 18:31, 2 September 2022

Субтрактивный тор

Системное название
PartDesign_SubtractiveTorus
Расположение в меню
Part Design → Создать субтрактивный примитив → Субтрактивный тор
Верстаки
PartDesign
Быстрые клавиши
Нет
Представлено в версии
0.17
См. также
Создать субтрактивный примитив, Аддитивный тор

Описание

Inserts a subtractive torus in the active Body. Its shape is subtracted from the existing solid.

On the left: active body (A) shown in grey and subtractive torus (B) shown in transparent red; result on the right.

Применение

  1. Press the Subtractive Torus button. Note: the Subtractive Torus is part of an icon menu labelled Create an additive primitive. After launching FreeCAD, the Subtractive Box is the one displayed in the toolbar. To get the Torus, click on the down arrow besides the visible icon and select Subtractive Torus in the menu.
  2. Set the Primitive parameters and Attachment.
  3. Click OK.
  4. A Torus feature appears under the active Body.

Опции

Параметры Тора после его создания можно изменить двумя способами:

  • Дважды щелкнув по нему в дереве модели или щелкнув правой кнопкой мыши и выбрав Редактировать примитив в контекстном меню; это откроет окно параметров примитива.
  • Через Редактор свойств.

Свойства

  • ДанныеAttachment: defines the attachment mode as well as the Attachment Offset. See Part EditAttachment.
  • ДанныеLabel: Label given to the Torus object. Change to suit your needs.
  • ДанныеRadius1: Radius of the imaginary orbit around which the circular cross-section revolves. (The distance between the center of the torus and the center of the revolving cross section)
  • ДанныеRadius2: Radius of the circular cross-section defining the form of the torus.
  • ДанныеAngle1: (labelled V parameter in the Primitive parameters) lower truncation of the torus, parallel to the circular cross section (-180° in a full torus). A bug in the sources causes unexpected results at changing Angle1.
  • ДанныеAngle2: (unlabelled in the Primitive parameters) upper truncation of the ellipsoid, parallel to the circular cross section (180° in a full torus). A bug in the sources causes unexpected results at changing Angle2.
  • ДанныеAngle3: (labelled U parameter in the Primitive parameters) angle of rotation of the circular cross section (360° in a full torus).