PartDesign SubtractiveCone/ru: Difference between revisions

From FreeCAD Documentation
(Created page with "Параметры Конуса после его создания можно изменить двумя способами: * Дважды щелкнув по нему в д...")
Line 36: Line 36:
==Опции==
==Опции==


Параметры Конуса после его создания можно изменить двумя способами:
The Cone can be edited after its creation in two ways:
* Дважды щелкнув по нему в дереве модели или щелкнув правой кнопкой мыши и выбрав '''Редактировать примитив''' в контекстном меню; это откроет окно параметров примитива.
* Double-clicking it in the Model tree, or by right-clicking and selecting '''Edit primitive''' in the contextual menu; this brings up the Primitive parameters.
* Via the [[Property_editor|Property editor]].
* Через [[Property_editor/ru|Редактор свойств]].


==Свойства==
==Свойства==

Revision as of 18:29, 2 September 2022

Субтрактивный конус

Системное название
PartDesign_SubtractiveCone
Расположение в меню
Part Design → Создать субтрактивный примитив → Субтрактивный конус
Верстаки
PartDesign
Быстрые клавиши
Нет
Представлено в версии
0.17
См. также
Создать субтрактивный примитив, Аддитивный конус

Описание

Inserts a subtractive cone in the active Body. Its shape is subtracted from the existing solid.

On the left: active body (A) shown in grey and subtractive cone (B) shown in transparent red; result on the right.

Применение

  1. Press the Subtractive Cone button. Note: the Subtractive Cone is part of an icon menu labelled Create a subtractive primitive. After launching FreeCAD, the Subtractive Box is the one displayed in the toolbar. To get to the Cone button, click on the down arrow besides the visible icon and select Subtractive Cone in the menu.
  2. Set the Primitive parameters (for a complete cone, set one of the radii to zero) and the Attachment.
  3. Click OK.
  4. A Cone feature appears under the active Body.

Опции

Параметры Конуса после его создания можно изменить двумя способами:

  • Дважды щелкнув по нему в дереве модели или щелкнув правой кнопкой мыши и выбрав Редактировать примитив в контекстном меню; это откроет окно параметров примитива.
  • Через Редактор свойств.

Свойства

  • ДанныеAttachment: defines the attachment mode as well as the Attachment Offset. See Part EditAttachment.
  • ДанныеLabel: label given to the Cone object. Change to suit your needs.
  • ДанныеRadius1: the radius value at the cone's base.
  • ДанныеRadius2: the radius value at the cone's top. A non-zero value creates a truncated cone.
  • ДанныеHeight: the height of the cone along its axis.
  • ДанныеAngle: angle of rotation of the cross section (360 degrees in a full cone).