PartDesign Цепное колесо (звёздочка)
PartDesign Sprocket |
Menu location |
---|
Part Design → Sprocket... |
Workbenches |
PartDesign |
Default shortcut |
None |
Introduced in version |
0.19 |
See also |
None |
Description
This tool allows you to create a 2D profile of a sprocket (or chainwheel). It can be padded with the PartDesign Pad feature.
Usage
- Optionally activate the correct body.
- Go to the menu Part Design → Sprocket....
- Set the ДанныеNumber Of Teeth and the ДанныеSprocket Reference.
- Click OK.
- If there was no active body: drag and drop the sprocket into a body for the application of further features like padding.
Properties
- ДанныеNumber Of Teeth: Number of teeth
- ДанныеSprocket Reference: The sprocket type. A list of sprocket definitions. introduced in version 0.20 The list includes ANSI and ISO-norms as well as some bicycle and motorcycle sprocket definitions.
- ДанныеPitch: Distance between two teeth
- ДанныеRoller Diameter: Diameter of the chain rollers the sprocket is designed for
- ДанныеThickness:The principal thickness of the sprocket. Note: The sprocket cannot just be padded with this thickness because the teeth have side chamfers. Therefore look at the sprocket definition to model a valid 3D sprocket. introduced in version 0.20
PartDesign
- Инструменты структуры: Part, Group
- Вспомогательные инструменты: Create body, Create sketch, Edit sketch, Map sketch to face
- Инструменты моделирования
- Инструменты данных: Create a datum point, Create a datum line, Create a datum plane, Create a local coordinate system, Create a shape binder, Create a clone
- Аддитивные инструменты: Pad, Revolution, Additive loft, Additive pipe, Additive box, Additive cone, Additive cylinder, Additive ellipsoid, Additive prism, Additive sphere, Additive torus, Additive wedge
- Субстрактивные инструменты: Pocket, Hole, Groove, Subtractive loft, Subtractive pipe, Subtractive box, Subtractive cone, Subtractive cylinder, Subtractive ellipsoid, Subtractive prism, Subtractive sphere, Subtractive torus, Subtractive wedge
- Инструменты трансформации: Mirrored, Linear Pattern, Polar Pattern, Create MultiTransform
- Отделочные инструменты: Fillet, Chamfer, Draft, Thickness
- Бинарные: Boolean operation
- Дополнительно: Migrate, Shaft design wizard, Involute gear
- Инструменты контекстного меню: Set tip, Move object to other body, Move object after other object
Документация пользователя
- Начинающим
- Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
- Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования
- Помощь: Учебники, Видео учебники
- Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework