PartDesign Аддитивный Куб (Параллелепипед)

From FreeCAD Documentation
Revision as of 18:34, 1 September 2022 by Evgeniy (talk | contribs)

Аддитивный куб (параллелепипед)

Системное название
PartDesign_AdditiveBox
Расположение в меню
Part Design → Создать аддитивный примитив → Аддитивный куб (параллелепипед)
Верстаки
PartDesign
Быстрые клавиши
Нет
Представлено в версии
0.17
См. также
Создать аддитивный примитив, Субтрактивный куб (параллелепипед)

Описание

Вставляет в активное Тело простую геометрическую форму - куб (параллелепипед), в качестве базового конструктивного элемента, или объединяет этот элемент с уже существующей совокупностью конструктивных элементов.

Применение

  1. Press the Additive Box button. Note: the Additive Box is part of an icon menu labelled Create an additive primitive. After launching FreeCAD, the Additive Box is the one displayed in the toolbar. If a different primitive is displayed, click on the down arrow besides the icon and select Additive Box in the menu.
  2. Set the Primitive parameters and Attachment.
  3. Click OK.
  4. A Box feature appears under the active Body.

Опции

The Box can be edited after its creation in two ways:

  • Double-clicking it in the Model tree, or by right-clicking and selecting Edit primitive in the contextual menu; this brings up the Primitive parameters.
  • Via the Property editor.

Properties

  • ДанныеAttachment: defines the attachment mode as well as the Attachment Offset. See Part EditAttachment.
  • ДанныеLabel: Label given to the Box object. Change to suit your needs.
  • ДанныеLength: the Box's dimension in the X-direction.
  • ДанныеWidth: the Box's dimension in the Y-direction.
  • ДанныеHeight: the Box's dimension in the Z-direction.